Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders; English version of DIN EN 12862
可运输气瓶.可再填充可运输焊接铝合金气瓶的设计和制造规范；德文版EN 12862:2000

2000-08-01

Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods
可运输气瓶.容量不超过150升的可再充装焊接容器.第3部分:用试验方法证明设计合理的焊接碳钢气瓶

2011-01-26

Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres-Welded carbon steel cylinders made to a design justified by experimental methods
可运输的气瓶 容量不超过150升的可再填充焊接容器

2012-04-30

Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres-Welded austenitic stainless steel cylinders made to a design justified by experimental methods
可运输的气瓶 容量不超过150升的可再填充焊接容器

2006-05-31

Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods (includes Corrigendum AC:2012)
可运输气瓶.容量不超过150升的可再充装焊接容器.第3部分:用试验方法证明设计合理的焊接碳钢气瓶；德文版EN 14638-3:2010+AC:2012

2012-06-01

Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
可运输气瓶.容量不超过150升的可再填充焊接容器.第1部分:按试验方法证明设计合理的奥氏体不锈钢焊接气瓶；德文版EN 14638-1:2006

2006-07-01

Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
可运输气瓶.容量不超过150升的可再填充焊接容器.第1部分:按试验方法证明设计合理的焊接奥氏体不锈钢气瓶

2007-05-30

Draft Document - LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection; German and English version EN 1440:2016+A1:2018/prA2:2019
文件草案——液化石油气设备和附件——可运输、可重复填充的传统焊接和钎焊钢制液化石油气（LPG）气瓶——定期检查；德语和英语版本EN 1440:2016+A1:2018/prA2:2019

2019-03-01

Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0.5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an R<(Index)m> value of less than 1100 Mpa; English version of DIN EN 1964-3
可运输气瓶.容量为0.5升至150升（含150升）的可再充装可运输无缝钢气瓶的设计和制造规范.第3部分:最大R<（指数）m>值小于1100 MPa的不锈钢气瓶；德式ve

2000-04-01