MIL MIL-DTL-8834K-开关拨动开关正断开关通用规范-国家数字标准馆

现行 MIL MIL-DTL-8834K

到馆提醒

收藏跟踪

购买正版

Switches, Toggle, Positive Break, General Specification for 开关拨动开关正断开关通用规范

发布日期： 2016-02-29

本规范涵盖了军事服务对快动、不可拨动、正向断开和闭合、单孔安装拨动开关的要求。这些开关用于交流（ac）和直流（dc）应用中，用于干式电路、低电平和电源切换。本规范涵盖的密封特性包括开关密封装置和环境密封装置（见6.1）。

This specification covers the military service requirements for snap-action, non-teasable, positive-break and make, one-hole mounting toggle switches. These switches are intended for use in alternating current (ac) and direct current (dc) applications for dry circuit, low level, and power switching. The sealing characteristics covered by this specification include toggle sealed devices and environmentally sealed devices (see 6.1).

分类信息

发布单位或类别：美国-美国军事规范和标准

关联关系

研制信息

相似标准/计划/法规

MIL MIL-DTL-8834J Amendment 1(amendment incorporated)

Switches, Toggle, Positive Break, General Specification for
正断拨动开关通用规范

MIL MIL-DTL-8834J Supplement 1

Switches, Toggle, Positive Break, General Specification for
正断拨动开关通用规范

MIL MIL-DTL-8834K Amendment 1(amendment incorporated)

Switches, Toggle, Positive Break, General Specification for
正断拨动开关通用规范

MIL MIL-DTL-8834K Supplement 1

Switches, Toggle, Positive Break, General Specification for
正断拨动开关通用规范

MIL MIL-DTL-8834J Amendment 2(all prev amd incorp.)

Switches, Toggle, Positive Break, General Specification for
正断拨动开关通用规范

QPL QPL-8834-20

SWITCHES, TOGGLE, POSITIVE BREAK, GENERAL SPECIFICATION FOR(SUPERSEDING QPL-8834-19)
开关拨动开关正极断开通用规范（代替QPL-8834-19）

SJ 51315/1-1994

ＫＮＣ６型可靠断路钮子开关详细规范
Switches,toggle positive break,Style KNC6,detail specification for

MIL MIL-DTL-9419H

Switch, Toggle, Momentary, Four-Position on, Center Off, General Specification for
开关拨动瞬时四位打开中心关闭通用规范

MIL MIL-DTL-9419H Amendment 1

Switch, Toggle, Momentary, Four-Position on, Center Off, General Specification for
开关拨动瞬时四位接通中心断开通用规范

Switch, Toggle, Positive Break, Miniature, Toggle Sealed, Solder Lug, Single Pole,.469 Mounting Bushing
开关拨动正极断开微型拨动密封焊耳单极 .469安装套管

Switch, Toggle, Positive Break, Miniature Toggle Sealed, Solder Lug, Double Pole,.469 Mounting Bushing
开关拨动正极断开微型拨动密封焊耳双极 .469安装套管

MIL MS90310H Notice 1-Validation

Switch, Toggle, Positive Break, Miniature, Toggle Sealed, Solder Lug, Single Pole,.469 Mounting Bushing
开关拨动正断微型拨动密封焊片单极 .469安装套管

MIL MS90311K Amendment 1(amendment incorporated)

Switch, Toggle, Positive Break, Miniature Toggle Sealed, Solder Lug, Double Pole,.469 Mounting Bushing
开关拨动正断微型拨动密封焊接接线片双极 .469安装套管

GOST 27383-1987

Переключатели типа "Тумблер". Общие технические условия
拨动开关一般规格

MIL MS21346F Notice 1-Validation

Switch, Toggle, Positive Break, Lever Lock and Toggle, Miniature, Toggle Sealed, Integrated Wire Terminals, Single Pole,.469 Mounting Bushing
开关拨动正断杠杆锁和拨动微型拨动密封集成电线端子单极 .469安装套管

MIL MS21346F Notice 2-Validation

Switch, Toggle, Positive Break, Lever Lock and Toggle, Miniature, Toggle Sealed, Integrated Wire Terminals, Single Pole,.469 Mounting Bushing
开关拨动正断杠杆锁和拨动微型拨动密封集成电线端子单极 .469安装套管

Switch, Toggle, Positive Break, Lever Lock, Miniature, Toggle Sealed, Solder Lug, Single Pole,.469 Mounting Bushing
开关拨动正极断开杠杆锁微型拨动密封焊耳单极 .469安装衬套

Switch, Toggle, Positive Break, Lever Lock, Miniature Toggle Sealed, Solder Lug, Single Pole,.469 Mounting Bushing
开关拨动正极断开杠杆锁微型拨动密封焊耳单极 .469安装衬套

Switch, Toggle, Positive Break, Special Circuit, Miniature Toggle Sealed, Solder Lug, Single Pole,.469 Mounting Bushing
开关拨动开关正极断路器特殊电路微型开关密封焊耳单极 .469安装套管

Switch, Toggle, Positive Break, Miniature, Toggle Sealed, Printed Circuit Board Terminals, Single Pole,.250 Mounting Bushing
开关拨动开关正极断路器微型拨动密封印刷电路板端子单极 .250安装套管

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统