1.1 本指南介绍了执法和惩戒官员佩戴的防护手套的选择和采购。 1.2 本指南向最终用户解释了以下两个标准的内容和价值，以及如何采购符合其要求的手套。 1.2.1 规格 E3109 : 1.2.1.1 规范的目的 E3109 旨在提供性能要求、性能等级和测试方法，用于评估执法和惩戒应用中使用的防护手套。 1.2.1.2 包括测试方法和性能评级，以帮助手套购买者和最终用户评估防护手套是否满足其需求。 手套不需要满足本规范中规定的所有性能要求。 1.2.2 实践 E3108 : 1.2.2.1 实践 E3108 制定了执法和惩戒官员佩戴的防护手套的合格评定要求，并提供了两种验证防护手套是否符合要求的选项:( 1. )供应商的符合性声明（SDOC）和( 2. )认证。 1.2.2.2 本规程旨在供采购商和供应商在采购符合规范的手套时使用 E3109 ，买方负责选择SDOC或认证。 1.3 本指南和上述标准是根据对终端用户进行的有关人员关注的危险和操作要求的调查而制定的。（参见第节 5. .) 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 本指南旨在帮助执法和惩戒官员选择和购买既满足其需求又经证明符合规范相关性能要求的防护手套 E3109 . 4.2 该指南解释了性能要求、性能等级和用于评估性能的测试方法。

1.1 This guide addresses selection and procurement of protective gloves worn by law enforcement and corrections officers. 1.2 This guide explains to end users the content and value of the two below listed standards and how to procure gloves that meet their requirements. 1.2.1 Specification E3109 : 1.2.1.1 The purpose of Specification E3109 is to provide performance requirements, performance ratings, and test methods for the evaluation of protective gloves used in law enforcement and corrections applications. 1.2.1.2 Test methods and performance ratings are included to aid glove purchasers and end users in their evaluation of whether a protective glove meets their needs. It is not required that a glove meet every performance requirement specified in this specification. 1.2.2 Practice E3108 : 1.2.2.1 Practice E3108 establishes the conformity assessment requirements for protective gloves worn by law enforcement and corrections officers and provides two options for verifying that protective gloves meet requirements: ( 1 ) supplier’s declaration of conformity (SDOC) and ( 2 ) certification. 1.2.2.2 The practice is intended to be used by purchasers and suppliers in the procurement of gloves that meet Specification E3109 , and the purchaser is responsible for selecting either SDOC or certification. 1.3 This guide and the aforementioned standards were developed based on a survey of end users regarding hazards of concern and operational requirements of officers. (See Section 5 .) 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This guide is intended to assist law enforcement and corrections officers in selecting and purchasing protective gloves that both meet their needs and have been demonstrated to meet relevant performance requirements of Specification E3109 . 4.2 The guide explains the performance requirements, performance ratings, and test methods for assessing performance.