BS EN 14033-3:2017规定了重大危险、危险情况和常见事件 因适应铁路使用而产生的铁路机械。这些机器是 用于轨道、结构、基础设施和固定设备的施工、维护和检查 电气牵引设备，当其按预期使用或在以下情况下误用时: 制造商可合理预见，见第4条。本欧洲标准适用于有轨机械和其他车辆，称为机械- 专门在铁路上工作（利用钢轨和车轮之间的摩擦附着力），但 包括在工作位置部分支撑在道碴或地层上的机器，以及 用于轨道、构筑物、基础设施和固定电力系统的施工、维护和检查 牵引设备。本欧洲标准适用于操作信号的机器 以及控制系统。其他欧洲标准中涉及其他类似机器，见附录G。本欧洲标准规定了正常情况下运行期间的常见危险， 组装和安装、调试、使用（包括设置、编程和工艺） 机器的操作、清洁、故障查找、维护和停用。特殊情况下，如极端环境，可能需要采取额外的安全措施 高度腐蚀或污染环境的温度；e、 g.由于化学品的存在，以及 潜在的爆炸性环境。本欧洲标准不涉及特殊情况的具体措施。这个 铁路基础设施经理和 范围中提及的制造商和/或机器操作员提出的要求如下: 本欧洲标准中未涉及。如果有必要采取此类额外措施，则应 由制造商和机器操作员商定。制造商将对此负责 独立于本欧洲标准，为额外的 任何附加或替代要求造成的危险。交叉引用:EN ISO 14120（ISO 14120:2015）ASEN 620:2002EN 474-1:2006+A4: 3.3.3.3.3）adadadad3.3.3.3.3.3.3.3.3）adn（ISO 1411:2007）asn（ISO 1411:2007）asn）a）asn（ISO 1411:2007）asn）asn）adn）adadadn）adadn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）adn）n）n）adn）n）n）adn）adn）adn）adn）n）n）n）adn）n）n）n）n）n）n）n）n）n）n）n）n）n）n）n）adn）adISO 4414（ISO 4414:2010）ASIEC 61310-3:2007 EN ISO 4871:2009（ISO 4871:1996）ASISO 3795:1989ISO 13849-2:2012 ED2ISO 6682:1986EN 60204-32（IEC 60204-32:2008）ASISO 5006:2006 Ed 1ISO 12508:1994（R10）EN ISO 7731:2008（ISO 7731: 3）adn）adn（ISO 1355:2010）adn）adn）adn（ISO 133849-2）ASEN（ISO 133849-2）ASEN（ISO 133849-2）ASEN（ISO 133849-2）ASEN（ISO 133849-2（ISO 133849-2:2012）ASEN（ISO 138449-1349-2:2012）ASEN ISO 1357（ISO 1357（ISO 1357:2008）ASEN 14033-3-2-2-2008（2008）as3-2008）as3-3-2008）as3-3-3-3-3-3-3-2008（2008）as3-2008）as3-3-3-3-3-3-3-3-2008（2008）as3-2008）as3-3-3-3-3-3-3-3-3-3-3-3-2008）as3-3-3-2-2-2-3-3-3-3-3-2-2-N 2867:2009 EN ISO 11201（ISO 11201:2010）ASISO 3744:2010 Ed 3EN ISO 3471（ISO 3471:2008）ASISO 14122-2:2016ISO/TR 9953:1996（R10）ISO 4414:2010 CD-ROM Ed 3ISO 2867:2011 Ed 7EN 547- 1:1996EN 614-1:2006ISO 14122-3:2016EN ISO 12100（ISO 12100:2010）ASEN ISO 14122-2（ISO 14122-2:2016）ASEN ISO 3744（ISO 3744:2010）ASEN 12999:2011ISO 12001:1996ISO 4413:2010 CD-ROM Ed 3EN 15153-2:2013EN ISO 13849-1（ISO 13849-1:2015）ASIEC 61310-1:2007EN 61496-1（IEC 61496-1:2012）ASEN 894-2:1997EN 547-3:1996EN ISO 14120-2008:11671:2008（ISO 13732-1:2006）ASI购买本文件时可获得的所有现行修订均包括在购买本文件中。

BS EN 14033-3:2017 specifies the significant hazards, hazardous situations and events common to rail bound machines and arising due to the adaptation for their use on railways. These machines are intended for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment, when they are used as intended or under conditions of misuse which are reasonably foreseeable by the manufacturer, see Clause 4.This European Standard applies to railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilizing friction adhesion between the rail and rail wheels) but including machines that in working position are partly supported on the ballast or the formation and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex G.This European Standard specifies the common hazards, in normal circumstances, during running, assembly and installation, commissioning, use (including setting, programming, and process changeover), operation, cleaning, fault finding, maintenance and de-commissioning of the machines.Additional safety measures can be required by exceptional circumstances, such as extreme ambient temperatures highly corrosive or contaminating environment; e.g. due to the presence of chemicals, and potentially explosive atmospheres.Specific measures for exceptional circumstances are not dealt with in this European Standard. The specific measures for exceptional circumstances introduced by a railway infrastructure manager and requirements introduced by the manufacturer and/or machine operator as referred to in the scope are not dealt with in this European Standard. When such additional measures are necessary, they should be agreed between the manufacturer and the machine operator. The manufacturer will be responsible independently of this European Standard, for the provision of risk reduction measures for additional hazards created by any additional or alternative requirements.Cross References:EN ISO 14120 (ISO 14120:2015) ASEN 620:2002EN 474-1:2006+A4:2013EN 894-3:2000IEC 61310-2:2007EN ISO 3411 (ISO 3411:2007) ASEN ISO 14122-3 (ISO 14122-3:2016) ASEN 61310-1 (IEC 61310-1:2007) ASEN ISO 12001 (ISO 12001:1996) ASISO 13732-1:2006 Ed 1ISO 5353:1995 (R05)EN 50155:2007ISO 13849-1:2015EN 15746-1:2010EN 1032:1996ISO 13855:2010 Ed 2ISO 13850:2015ISO 7000:2012 DB ED4EN 842:1996EN ISO 4414 (ISO 4414:2010) ASIEC 61310-3:2007EN ISO 4871:2009 (ISO 4871:1996) ASISO 3795:1989ISO 13849-2:2012 ED2ISO 6682:1986EN 60204-32 (IEC 60204-32:2008) ASISO 5006:2006 Ed 1ISO 12508:1994 (R10)EN ISO 7731:2008 (ISO 7731:2003) ASEN ISO 13855 (ISO 13855:2010) ASEN ISO 5353EN 62262EN 3EN 61508EN 280EN 28662-1ISO 10263EN 2EN 61310-2EN 981:1996EN 60825-1:2014/prAEN ISO 13849-2 (ISO 13849-2:2012) ASEN ISO 13857 (ISO 13857:2008) ASEN 14033-2:2017EN 16507:2014EN 60529:1991EN 61310-3 (IEC 61310-3:1999 Adopted)EN 547-2:1996ISO 3864-1:2011 CD-ROM Ed 2EN ISO 6683:2008 (ISO 6683:2005) ASEN 619:2002EN 2867:2009EN ISO 11201 (ISO 11201:2010) ASISO 3744:2010 Ed 3EN ISO 3471 (ISO 3471:2008) ASISO 14122-2:2016ISO/TR 9953:1996 (R10)ISO 4414:2010 CD-ROM Ed 3ISO 2867:2011 Ed 7EN 547-1:1996EN 614-1:2006ISO 14122-3:2016EN ISO 12100 (ISO 12100:2010) ASEN ISO 14122-2 (ISO 14122-2:2016) ASEN ISO 3744 (ISO 3744:2010) ASEN 12999:2011ISO 12001:1996ISO 4413:2010 CD-ROM Ed 3EN 15153-2:2013EN ISO 13849-1 (ISO 13849-1:2015) ASIEC 61310-1:2007EN 61496-1 (IEC 61496-1:2012) ASEN 894-2:1997EN 547-3:1996ISO 14120:2015EN 16704-2-1:2016ISO 12100:2010 Ed 1ISO/TR 11688-1:1995EN ISO 13732-1:2008 (ISO 13732-1:2006)ASIAll current amendments available at time of purchase are included with the purchase of this document.