首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 EN ISO 4623-1:2018
到馆阅读
收藏跟踪
购买正版
Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2018) 油漆和清漆 - 耐丝状腐蚀的测定 - 第1部分:钢基材
发布日期: 2018-11-14
实施日期: 2018-11-14
本文件描述了评估油漆或清漆涂层对钢的保护作用的试验程序,以防因划破涂层的刻痕而产生丝状腐蚀。它仅适用于评估所测试的涂层\/基板组合的性能。这不适合预测不同基材上涂层的性能。
This document describes a test procedure for assessing the protective action of coatings of paints or varnishes on steel against filiform corrosion arising from a scribed mark cut through the coating. It is only suitable for assessing the performance of the coating/substrate combination tested. It is not suitable for predicting the performance of the coating on different substrates.
分类信息
关联关系
研制信息
归口单位: CEN/TC 139-
相似标准/计划/法规
现行
ISO 4623-1-2018
Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: Steel substrates
油漆和清漆 - 对丝状腐蚀性的测定 - 第1部分:钢基材
2018-10-05
现行
KS M ISO 4623-2
도료와 바니시 — 실모양 부식 저항 측정 —제2부: 알루미늄 소지
色漆和清漆.耐丝状腐蚀的测定.第2部分:铝基材
2021-12-21
现行
ISO 4623-2-2016
Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates
色漆和清漆耐丝状腐蚀的测定第2部分:铝基材
2016-07-28
现行
UNE-EN ISO 4623-2-2004
Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2003)
色漆和清漆耐丝状腐蚀的测定第2部分:铝基材
2004-11-12
现行
KS M ISO 4623-1
도료와 바니시-실형 부식 저항 측정-제1부:철강소지
色漆和清漆耐丝状腐蚀的测定第1部分:钢基体
2017-12-27
现行
KS M ISO 4623-1
도료와 바니시 — 실모양 부식 저항 측정 — 제1부: 철강소지
色漆和清漆.耐丝状腐蚀性的测定.第1部分:钢基体
2022-12-13
现行
UNE-EN ISO 4623-1-2002
Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates. (ISO 4623-1:2000)
色漆和清漆.耐丝状腐蚀的测定.第1部分:钢衬底 (ISO 4623-1-2000)
2002-07-29
现行
EN ISO 4623-2-2016
Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016)
油漆和清漆 - 耐丝状腐蚀的测定 - 第2部分:铝基板(ISO 4623-2:2016)
2016-08-24
现行
KS M ISO 4623-2(2016 Confirm)
도료와 바니시-실모양 부식 저항 측정-제2부:알루미늄 소지
色漆和清漆耐丝状腐蚀的测定第2部分:铝基体
2006-12-15
现行
ISO 11997-1-2017
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid
油漆和清漆 - 耐循环腐蚀条件的测定 - 第1部分:湿(盐雾)/干/湿
2017-08-11
现行
EN ISO 11997-1-2017
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017)
油漆和清漆 - 耐循环腐蚀条件的测定 - 第1部分:湿(盐雾)/干/湿(ISO/DIS 11997-1:2016)
2017-09-27
现行
EN ISO 2812-1-2017
Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017)
油漆和清漆 - 耐液体的测定 - 第1部分:浸入水中的液体中
2017-12-13
现行
KS M ISO 11997-2(2019 Confirm)
도료와 바니시 — 순환 부식 조건에 대한 저항성 측정 — 제2부: 적심(염수분무)/건조/습도/자외선
油漆和清漆 - 耐循环腐蚀条件的测定 - 第2部分:湿(盐雾)/干/湿/紫外线
2014-12-16
现行
KS M ISO 11997-1(2016 Confirm)
도료와 바니시-순환 부식 조건에 대한 저항성 측정-제1부:적심(염수 분무)/건조/습도
色漆和清漆耐循环腐蚀条件的测定第1部分:湿(盐雾)/干/湿
2011-12-28
现行
KS M ISO 11997-1
도료와 바니시 — 순환 부식 조건에 대한 저항성 측정 —제1부: 적심(염수 분무)/건조/습도
色漆和清漆耐循环腐蚀条件的测定第1部分:湿(盐雾)/干/湿
2021-12-21
现行
GB/T 31588.1-2015
色漆和清漆 耐循环腐蚀环境的测定 第1部分:湿(盐雾)/干燥/湿气
Paints and varnishes—Determination of resistance to cyclic corrosion conditions—Part 1: Wet(salt fog)/dry/humidity
2015-06-02
现行
EN ISO 11997-2-2013
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
油漆和清漆 - 耐循环腐蚀条件的测定 - 第2部分:湿(盐雾)/干/湿/紫外光(ISO 11997-2:2013)
2013-09-04
现行
UNE-EN ISO 11997-1-2007
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humidity (ISO 11997-1:2005)
色漆和清漆.耐循环腐蚀条件的测定.第1部分:湿(盐雾)/干/湿(ISO 11997-1-2005)
2007-02-28
现行
KS D ISO 3651-1
스테인리스강의 입계 부식 저항성 측정 — 제1부: 오스테나이트계 및 페라이트 + 오스테나이트(2상 혼합)계 스테인리스강 — 질산 용액 무게감량 부식 시험(휴이시험)
不锈钢耐晶间腐蚀的测定 - 第1部分:奥氏体和铁素体 - 奥氏体(双相)不锈钢 - 通过测量质量损失测量硝酸介质中的腐蚀试验(Huey试验)
2019-10-31
现行
DIN EN ISO 3651-1
Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998)
不锈钢耐晶间腐蚀性的测定第1部分:奥氏体和铁素体奥氏体(双相)不锈钢通过质量损失测量在硝酸介质中的腐蚀试验(休伊试验)(ISO 3651-1-1998);德文版EN ISO 3651-1:1998
1998-08-01