1.1 本规程旨在用于确定大麻/大麻预卷的物理特性。 1.2 本规程适用于使用任何类型大麻植物（即大麻/大麻）的草药材料制成的预卷，无论大麻素含量如何。为简洁起见，“大麻”一词此后应指任何类型的大麻植物（大麻/大麻）。 1.3 这一做法有助于明确卷前准备和采样，以识别、测量和报告大麻卷的长度、直径和重量- 卷。 1.4 本规程不适用于本标准范围外的注射大麻预卷。 1.5 单位- 以国际单位制或美国习惯单位（USC单位）表示的数值应单独视为标准。每个系统中规定的值可能不是精确的等效值；因此，每个系统应相互独立使用。将两个系统的值合并可能会导致不符合标准。公制单位将作为标准单位，USC单位将显示在相对于公制单位的括号中。 1.6 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 本规程将规定预卷的基线物理特性，包括预卷中大麻草药材料的重量、预卷的长度和预卷的直径。 4.2 这一做法将明确大麻预卷的物理特性。

1.1 This practice is intended to be used to identify the physical properties of a cannabis/hemp pre-roll. 1.2 This practice shall apply to pre-rolls made using herbal material(s) from any type of a cannabis plant (that is, cannabis/hemp), regardless of the cannabinoid content. For the sake of brevity, the term “cannabis” shall be used henceforth to refer to any type of cannabis plant (cannabis/hemp). 1.3 This practice helps to provide clarity on pre-roll preparation and sampling to identify, measure, and report the length, diameter, and weight of cannabis pre-rolls. 1.4 This practice shall not be applicable to infused cannabis pre-rolls, which are outside the scope of this standard. 1.5 Units— The values stated in either SI units or United States Customary Units (USC Units) are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Metric units will be stated as standard and USC units will be shown in brackets relative to the metric units. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This practice will specify the baseline physical properties of a pre-roll, including the weight of cannabis herbal material in the pre-roll, the length of the pre-roll, and the diameter of the pre-roll. 4.2 This practice will provide clarity on the physical properties of cannabis pre-rolls.