本文件旨在提供详细要求，以防止使用可疑的假冒或假冒紧固件。本文件的要求旨在补充更高质量标准（例如，AS/EN/JISQ9100、ISO 9001、ANSI/ASQC E4、ASME NQA-1、AS9120、AS9003和ISO/TS 16949或同等标准）和其他质量管理体系的要求文件。紧固件定义为美国联邦供应分类组代码，如下表所示:5305螺钉5306螺栓5307螺栓5310螺母和垫圈5315钉子、机器钥匙、，和销钉5320铆钉5325紧固装置5340其他硬件（本硬件行业规范中的特定零件适用，包括但不限于夹具、铰链、螺旋插入式紧固件和铆接- 螺母紧固件）本文件适用于机械连接两个或多个物体的金属和非金属部件:紧固件、螺钉、螺栓、铆钉（盲孔、实心、管状）、插入件、垫圈、螺母、闭锁手柄、夹具、销、钉子、固定器等，或其他材料是紧固件规范的一部分，则这些项目在本文件的范围内。对于紧固件制造中使用的金属原材料，请参考AS6279。本文件不适用于接头，如气动或液压接头和电气接头。附录A、B、C和D为指南。紧固件定义为美国联邦供应分类组代码，如下表所示: 5305螺钉5306螺栓5307螺柱5310螺母和垫圈5315钉子、机器钥匙和销5320铆钉5325紧固装置5340其他硬件-本硬件行业规范中的特定零件适用，包括但不限于夹具、铰链、螺旋插入式紧固件和锁紧螺母紧固件。本文件适用于机械连接两个或多个物体的金属和非金属部件:紧固件、螺钉、螺栓、铆钉（盲板、实心、管状）、插入件、垫圈、螺母、闭锁手柄、夹具、销、钉子、固定器等，或其他材料是紧固件规范的一部分，则这些项目在本文件的范围内。对于紧固件制造中使用的金属原材料，请参考SAE AS6279《金属库存的生产、分配和采购标准规程》。 本文件不包括连接器，如气动或液压配件、其他类型的硬件、胶水或粘合剂，包括带有或不带有粘合剂的紧固件的连接器。附录A、B和C用作指导，除非本组织合同中另有规定，否则不强制使用。

The purpose of this document is to provide detailed requirements to preclude the use of suspect counterfeit or counterfeit fasteners.The requirements of this document are intended to supplement the requirements of a higher-level quality standard (e.g., AS/EN/JISQ9100, ISO 9001, ANSI/ASQC E4, ASME NQA-1, AS9120, AS9003, and ISO/TS 16949 or equivalent) and other quality management system documents.Fasteners are defined as United States Federal Supply Classification Group codes as shown in the following list:5305 Screws5306 Bolts5307 Studs5310 Nuts and Washers5315 Nails, Machine Keys, and Pins5320 Rivets5325 Fastening Devices5340 Miscellaneous Hardware (specific parts in this hardware industry code are applicable, including, but not limited to, clamps, hinges, coiled insert fasteners, and clinch-nut fasteners)This document applies to metallic and non-metallic components that mechanically attach two or more objects: fasteners, screws, bolts, rivets (blind, solid, tubular), inserts, washers, nuts, latching handles, clamps, pins, nails, retainers, etc. If locking or treatment elements such as glue, adhesives, anti-galling, lubricant, or other materials are part of the fastener specifications, then those items are within the scope of this document.For metallic raw materials used in the manufacturing of fasteners, refer to AS6279. This document does not apply to connectors such as pneumatic or hydraulic fittings and electrical connectors. Appendices A, B, C, and D are guidance.Fasteners are defined as United States Federal Supply Classification Group codes as shown in the following list: 5305 Screws 5306 Bolts 5307 Studs 5310 Nuts and Washers 5315 Nails, Machine Keys, and Pins 5320 Rivets 5325 Fastening Devices 5340 Miscellaneous Hardware - Specific parts in this hardware industry code are applicable, including but not limited to clamps, hinges, coiled insert fasteners and clinch-nut fasteners. This document applies to metallic and non-metallic components that mechanically attaches two or more objects: fasteners, screws, bolts, rivets (blind, solid, tubular), inserts, washers, nuts, latching handles, clamps, pins, nails, retainers, or etc. If locking or treatment elements such as glue, adhesives, anti-galling, lubricant, or other materials are part of the fastener specifications then those items are within the scope of this document. For metallic raw materials used in the manufacturing of fasteners, refer to SAE AS6279 Standard Practice for Production, Distribution, and Procurement of Metal Stock. This document does not include connectors such as pneumatic or hydraulic fittings, other types of hardware, glue or adhesives including connectors with fasteners with or without adhesive bonds. Appendices A, B and C are used as guidance and are not mandatory for use unless otherwise mandated for use in the Organization¿¿¿s contract.