BS EN 60695-10-3:2016规定了模具应力消除变形试验。适用于 电工设备，包括由聚合材料制成的部件。本试验方法旨在评估因消除残余应力而产生的影响 应力，设定在最终产品的模制聚合物组件中。这可以缓解压力 当样品（通电或未通电）以规定的温度暴露在条件下时发生 规定时间内的温度。试样被认为具有 如果在调节至室温后，其符合规定的试验要求，则能够令人满意地经受住试验 标准本基本安全出版物主要供美国的技术委员会使用 根据IEC指南104中规定的原则编制标准，以及 ISO/IEC指南51。它不适用于制造商或认证机构。技术委员会的职责之一是，在适用的情况下，利用 基本安全出版物的编制。要求、试验方法 除非特别提及，否则本基本安全出版物的试验条件不适用 或包含在相关出版物中。交叉引用:IEC 60050IEC 60216-4-1IEC 60695-4:2012IEC指南104ISO/IEC指南51ISO 13943:2008EN 60216-4-1EN 60695-4:2012EN ISO 13943IEC 60695-1-10IEC 60695-1-11IEC 60050-151EN 60695-1-10EN 60695-1-11购买本文件时提供的所有当前修订版均包括在内。

BS EN 60695-10-3:2016 specifies a mould stress relief distortion test. It is applicable to electrotechnical equipment including parts made from polymeric materials.This test method is intended to evaluate the effects caused by relief of the residual processinduced stress, set in a moulded polymeric assembly of an end product. This stress relief occurs when the sample (energized or not), is exposed to conditioning at a defined temperature for a defined period of time. The test specimen is considered to have satisfactorily withstood the test if, after conditioning to room temperature, it meets defined test criteria.This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies.One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.Cross References:IEC 60050IEC 60216-4-1IEC 60695-4:2012IEC Guide 104ISO/IEC Guide 51ISO 13943:2008EN 60216-4-1EN 60695-4:2012EN ISO 13943IEC 60695-1-10IEC 60695-1-11IEC 60050-151EN 60695-1-10EN 60695-1-11All current amendments available at time of purchase are included with the purchase of this document.