1.1本规程涵盖了获得精确光谱数据以计算物体颜色所需的仪器测量要求、校准程序和材料标准。 1.2本规程列出了在特定方法、规程或规范中需要光谱测量时必须指定的参数。 1.3本规程的大多数章节适用于光谱仪和色度计，前者可以产生光谱数据作为输出，后者原则上类似，但只能产生色度数据作为输出。注意到这种适用性的例外情况。 1.4本规程的范围仅限于仅使用单个单色仪的光谱仪和光谱色度计。本惯例适用于待表征颜色的材料。 1.5以国际单位制表示的数值应视为标准值。本标准不包括其他计量单位。 1.6 本标准无意解决与其使用相关的安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 ====意义和用途====== 获得CIE三刺激值或通过转换获得描述物体颜色的其他坐标的最通用和可靠方法是使用光谱数据。如实践中所述，通过将物体光谱数据与代表CIE标准观察者和CIE标准光源的数据相结合来获得色度数据 E308年 . 本规程提供了选择用于提供所需精度数据的光谱仪工作参数的程序。它还规定了通过材料标准进行仪器校准，以及选择合适的样本以获得测量精度。

1.1 This practice covers the instrumental measurement requirements, calibration procedures, and material standards needed to obtain precise spectral data for computing the colors of objects. 1.2 This practice lists the parameters that must be specified when spectrometric measurements are required in specific methods, practices, or specifications. 1.3 Most sections of this practice apply to both spectrometers, which can produce spectral data as output, and spectrocolorimeters, which are similar in principle but can produce only colorimetric data as output. Exceptions to this applicability are noted. 1.4 This practice is limited in scope to spectrometers and spectrometric colorimeters that employ only a single monochromator. This practice is general as to the materials to be characterized for color. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== The most general and reliable methods for obtaining CIE tristimulus values or, through transformation of them, other coordinates for describing the colors of objects are by the use of spectrometric data. Colorimetric data are obtained by combining object spectral data with data representing a CIE standard observer and a CIE standard illuminant, as described in Practice E308 . This practice provides procedures for selecting the operating parameters of spectrometers used for providing data of the desired precision. It also provides for instrument calibration by means of material standards, and for selection of suitable specimens for obtaining precision in the measurements.