范围:本文件适用于含有天然或合成金刚石或cBN的超硬磨料产品 （立方氮化硼）。它包括精密磨削和切割轮、非精密切割轮、金刚石丝、安装点和其他用于非精密磨削的超硬磨料产品。它也适用于修复的超硬磨料切割轮。 本文件规定了消除或减少超硬磨料产品设计和应用中产生的危害的要求和/或措施。 本文件还包含验证是否符合要求的程序和测试，以及制造商将向用户提供的使用安全信息。 本文件不适用于粘结磨料产品、涂层磨料产品、旋转修整 工具、矫正器或任何非旋转超硬磨料产品。ISO-6103EN-61042的ISO-6103EN-61048标准的最新修订版包含在ISO-6103EN-61046-61042 ISO-61046-61046-61046-61046-61046-61042标准中。ISO-6103EN-61046-61046标准的ISO-61046-61042标准的ISO-61046-61046-61046-61042标准可在ISO-61046-61046-61046-61046-61046-61046-61046-61。

Scope: This document applies to superabrasives products containing natural or synthetic diamond or cBN (cubic boron nitride). It includes precision grinding and cutting-off wheels, non-precision cutting-off wheels, diamond wires, mounted points and other superabrasive products for non-precision grinding. It also applies to reconditioned superabrasive cutting-off wheels. This document specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the superabrasive products. This document contains also procedures and tests for verification of the compliance with the requirements as well as safety information for use, which will be made available to the user by the manufacturer. This document does not apply to bonded abrasive products, coated abrasive products, rotating dressing tools, truers or any non-rotating superabrasive products.Cross References:EN ISO 286-2:2010ISO 22917EN 60745-2-3EN ISO 19432EN 12413EN 22768-1EN ISO 11148-7ISO 6106ISO 666EN 13743EN ISO 286-1ISO 6104ISO 3864-2EN ISO 16089EN ISO 11148-9All current amendments available at time of purchase are included with the purchase of this document.