BS ISO 12260:2016-航空航天有涂层或无涂层的金属材料短或中长MJ螺纹阶梯柄内偏置十字带肋或无肋传动盘头螺钉强度等级小于或等于1100 MPa 尺寸-国家数字标准馆

现行 BS ISO 12260:2016

到馆提醒

收藏跟踪

购买正版

Aerospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions 航空航天有涂层或无涂层的金属材料短或中长MJ螺纹阶梯柄内偏置十字带肋或无肋传动盘头螺钉强度等级小于或等于1100 MPa 尺寸

发布日期： 2016-03-31

BS ISO 12260:2016规定了带内偏置十字形的盘头螺钉的尺寸
金属材料制短或中长MJ螺纹阶梯柄带肋或无肋传动，
有涂层或无涂层，强度等级小于或等于1100 MPa。本国际标准适用于航空航天产品标准的编制。交叉引用:ISO 286-2ISO 3353ISO 5855-2ISO 7913:1994ISO 14275ISO 14276购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS ISO 12260:2016 specifies the dimensions of pan head screws with internal offset cruciform
ribbed or unribbed drive, stepped shank, short or medium length MJ threads, in metallic material,
coated or uncoated, with strength classes less than or equal to 1,100 MPa.This International Standard is applicable to the compilation of aerospace product standards.Cross References:ISO 286-2ISO 3353ISO 5855-2ISO 7913:1994ISO 14275ISO 14276All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS ISO 14277-2002

Aerospace. Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives. Metric series
航空航天带肋驱动器用于内部偏置十字形带肋或无肋驱动器公制系列

Aerospace — Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives — Metric series
航空和航天；带肋驱动器用于内部偏置十字形带肋或无肋驱动器——公制系列

BS ISO 14278-2002

Aerospace. Gauges, for internal offset cruciform ribbed or unribbed drives. Metric series
航空航天内部偏置十字肋或无肋传动用量规公制系列

Aerospace — Gauges, for internal offset cruciform ribbed or unribbed drives — Metric series
航空和航天；内部偏置十字肋或无肋传动用量规——公制系列

KS W 0930(2018 Confirm)

항공 우주 - 나사, 접시 머리, 내부 오프셋 십자홈이 있거나 없는 드라이브, 머리끝 나사, MJ 나사, 금속 재료, 도장 또는 비도장, 강도 분류 1100MPa 이하치수
航空航天 - 螺丝平头内部偏移十字形肋或UNRIBBED DRIVE 螺纹头 MJ螺纹金属材料涂层或无涂层抗剪强度等级小于或等于1100MPa - 尺寸

KS W 0930(2023 Confirm)

항공 우주 - 나사, 접시 머리, 내부 오프셋 십자홈이 있거나 없는 드라이브, 머리끝 나사, MJ 나사, 금속 재료, 도장 또는 비도장, 강도 분류 1100MPa 이하치수
航空航天.内偏置粗糙带肋或无肋传动、螺纹连接至头部、MJ螺纹、金属材料、涂层或无涂层、强度等级小于或等于1100MPa的盘头螺钉.尺寸

Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
螺钉盘头内偏置十字形带肋或无肋驱动带螺纹至头部金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；螺钉盘头内偏置十字肋或无肋驱动螺纹至头部 MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空航天 - 螺丝盘头内部偏移十字形带肋或未经驱动阶梯柄短或中等长度MJ螺纹金属材料涂层或未涂层强度等级小于或等于1 100 MPa - 尺寸

Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空航天.强度等级小于或等于1100MPa的金属材料长MJ螺纹中径柄内偏置十字形带肋或无肋盘头螺钉.尺寸

BS ISO 5856-2008

Aerospace. Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
航空航天100°标准沉头螺钉内偏置十字肋或无肋驱动标准柄短或中长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

BS ISO 13921-2008

Aerospace. Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
航空航天100度缩径沉头螺钉内偏置十字肋或无肋驱动标准柄短或中长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

Aerospace — Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；100度缩径沉头螺钉内偏置十字肋或无肋驱动标准柄短或中长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

Aerospace — Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；100°标准沉头螺钉内偏置十字肋或无肋传动标准柄短或中长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

BS EN 4075-2008

Aerospace series. Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated. Classification: 490 MPa (at ambient temperature) / 425 °C
航空航天系列钝化耐腐蚀钢制斜十字槽盘头螺钉分类:490兆帕（环境温度）/425摄氏度

UNE-EN 3759-1997

AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/425 ºC.
航空航天系列钝化耐热耐腐蚀钢制带螺纹的偏置十字槽盘头螺钉分类:1100兆帕（环境温度）/425ºC

UNE-EN 3307-1997

AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 ºC.
航空航天系列钛合金制阳极氧化MOS2润滑偏置十字槽盘头螺钉分类:1100兆帕（环境温度）/315ºC

BS 93/717458 DC

Aerospace series. Screws, pan head, offset cruciform recess, threaded to head, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235 degreesC (prEN 4080)
航空航天系列镀镉合金钢制斜十字槽盘头螺钉分类:900兆帕（环境温度）/235摄氏度（prEN 4080）

DIN EN 4139-DRAFT

Draft Document - Aerospace series; screws, pan head, offset cruciform recess, threaded to head, in alloy steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 Â°C
文件草案——航空航天系列；镀镉合金钢制斜十字槽盘头螺钉螺纹至头部；分类:1100兆帕（环境温度）/235摄氏度

DIN EN 4080-DRAFT

Draft Document - Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 Â°C
文件草稿.航空航天系列.镀镉合金钢制螺纹连接头部偏置十字槽盘头螺钉.等级:900MPa（环境温度）/235°C

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统