BS EN 60974-6:2016规定了适用于有限责任公司的安全和性能要求 专为非专业人士设计的工作电弧焊和切割电源及辅助设备。 电动设备拟连接至单相公共低压 供应系统。发动机驱动电源的输出功率不得超过7.5 kVA。注1:该设备通常由居住区的非专业人员使用。IEC 60974的本部分不适用于要求 操作:引弧稳定装置；液体冷却系统；煤气控制台；三相输入电源；仅用于工业和专业用途。IEC 60974的本部分不适用于弧焊和切割电源和 辅助设备用于:机械引导应用；埋弧焊工艺；等离子气刨工艺；等离子焊接工艺；IEC 60974的其他部分也涵盖了这些内容。注2:为工业和专业用途设计的电源、送丝器、焊炬和电极架 分别包含在IEC 60974-1、IEC 60974-5、IEC 60974-7和IEC 60974-11中。注3:IEC 60974的本部分未规定给出的电磁兼容性（EMC）要求 在IEC 60974-10中。交叉引用:IEC 60529IEC 60974-1:2012IEC 60974-5:2013IEC 60974-7:2013IEC 60974-10IEC 60974-11IEC 61032:1997ISO 2503EN 60529EN 60974-1:2012EN 60974-5:2013EN 60974-7:2013EN 60974-10EN 60974-11EN 61032:1998EN ISO 2503IEC 60050IEC 60085IEC 60127-1IEC 60269-1IEC 60417IEC 60974IEC 61558- 1:2005 ISO 7000ISO 17846EN 60085EN 60127-1EN 60269-1EN 60974EN 61558-1:2005购买本文件时可获得的所有当前修订版均包含在购买本文件中。

BS EN 60974-6:2016 specifies safety and performance requirements applicable to limited duty arc welding and cutting power sources and auxiliaries designed for use by laymen. Electrically powered equipment is intended to be connected to the single phase public lowvoltage supply system. Engine driven power sources cannot exceed output power of 7,5 kVA.NOTE 1 This equipment is typically used by non-professionals in residential areas.This part of IEC 60974 is not applicable to arc welding and cutting power sources that require for operation:arc striking and stabilizing devices;liquid cooling systems;gas consoles;three-phase input supply;and which are intended for industrial and professional use only.This part of IEC 60974 is not applicable to arc welding and cutting power sources and ancillary equipment used in:mechanically guided applications;submerged arc welding process;plasma gouging process;plasma welding process;that are covered by other parts of IEC 60974.NOTE 2 Power sources, wire feeders, torches and electrode holders designed for industrial and professional use are respectively covered by IEC 60974-1, IEC 60974-5, IEC 60974-7 and IEC 60974-11.NOTE 3 This part of IEC 60974 does not specify electromagnetic compatibility (EMC) requirements that are given in IEC 60974-10.Cross References:IEC 60529IEC 60974-1:2012IEC 60974-5:2013IEC 60974-7:2013IEC 60974-10IEC 60974-11IEC 61032:1997ISO 2503EN 60529EN 60974-1:2012EN 60974-5:2013EN 60974-7:2013EN 60974-10EN 60974-11EN 61032:1998EN ISO 2503IEC 60050IEC 60085IEC 60127-1IEC 60269-1IEC 60417IEC 60974IEC 61558-1:2005ISO 7000ISO 17846EN 60085EN 60127-1EN 60269-1EN 60974EN 61558-1:2005All current amendments available at time of purchase are included with the purchase of this document.