首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 SAE J278_202106
到馆提醒
收藏跟踪
购买正版
Snowmobile Stop Lamp 摩托雪橇刹车灯
发布日期: 2021-06-10
本SAE标准提供了雪地车制动灯的测试程序、性能要求、设计指南和安装指南。
This SAE Standard provides test procedures, performance requirements, design guidelines, and installation guidelines for snowmobile stop lamp.
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
SAE J292_202107
Snowmobile and Snowmobile Cutter Lamps, Reflective Devices, and Associated Equipment
摩托雪橇车和摩托雪橇车切割器灯、反光装置和相关设备
2021-07-15
现行
SAE J279_202106
Snowmobile Tail (Rear Position) Lamp
雪地车尾灯(后位置)灯
2021-06-10
现行
SAE J1167_202109
Motorcycle Stop Lamp Switch
摩托车刹车灯开关
2021-09-15
现行
SAE J249_198806
MECHANICAL STOP LAMP SWITCH
机械停车灯开关
1988-06-01
现行
JIS D 5808-1994
Mechanical stop lamp switches for automobiles
汽车用机械停车灯开关
1994-01-01
现行
SAE J1133_201507
School Bus Stop Arm Lamp
校车停车灯
2015-07-08
现行
MIL MIL-PRF-32212A
Light Emitting Diode (LED) Composite Stop, Rear Turn Signal and Tail Lamps with Infra-Red Secure Blackout Tail and Blackout Stop Lamps
发光二极管(LED)复合制动灯、后转向信号灯和尾灯 带有红外安全遮光尾灯和遮光制动灯
2009-03-12
现行
MIL MIL-PRF-32212A Notice 2-Administrative
Light Emitting Diode (LED) Composite Stop, Rear Turn Signal and Tail Lamps with Infra-Red Secure Blackout Tail and Blackout Stop Lamps
发光二极管(LED)复合停车灯、后转向信号灯和尾灯 带红外线安全熄灭尾灯和熄灭停车灯
2019-02-26
现行
MIL MIL-PRF-32212A Notice 1-Validation
Light Emitting Diode (LED) Composite Stop, Rear Turn Signal and Tail Lamps with Infra-Red Secure Blackout Tail and Blackout Stop Lamps
发光二极管(LED)复合停车灯、后转向信号灯和尾灯 带红外线安全熄灭尾灯和熄灭停车灯
2014-03-28
现行
GB 5920-2019
汽车及挂车前位灯、后位灯、示廓灯和制动灯配光性能
Photometric characteristics of front and rear position lamps, end-outline marker lamps and stop lamps for motor vehicles and their trailers
2019-04-04
现行
SAE J1398_199608
Stop Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
总宽大于等于2032 mm的机动车上使用的制动灯
1996-08-01
现行
SAE J2261_201607
Stop Lamps and Front- and Rear-Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
总宽大于等于2032 mm的机动车上使用的制动灯和前后转向信号灯
2016-07-20
现行
GB/T 19125-2015
三轮汽车和低速货车 前位灯、后位灯和制动灯配光性能
Tri-wheel vehicles and low-speed goods vehicles—Photometric characteristics of front and rear position lamps,stop lamps
2015-05-15
现行
SAE AMS3677AJ586_201605
Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width
总宽小于2032 mm的机动车上使用的制动灯
2016-05-12
现行
SAE J586_201605
Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width
总宽小于2032 mm的机动车上使用的制动灯
2016-05-12
现行
BS 10/30202140 DC
BS ISO 13207-1. Road vehicles. LED lamp characteristics for bulb compatible failure detection. Part 1. LED lamps used for direction indicator and stop lamps
BS ISO 13207-1 公路车辆 用于灯泡兼容故障检测的LED灯特性 第一部分 用于方向指示灯和制动灯的LED灯
2010-09-08
现行
SAE J1432_201601
Rear High Mounted Stop Lamps and Rear High Mounted Turn Signal Lamps for Use on Vehicles 2032 mm or More in Overall Width
总宽大于等于2032 mm的车辆上使用的后高位刹车灯和后高位转向信号灯
2016-01-20
现行
SAE J186_198912
Supplemental High Mounted Stop and Rear Turn Signal Lamps for Use on Vehicles Less Than 2032 Mm in Overall Width
总宽小于2032 Mm的车辆上使用的附加高位刹车灯和后转向信号灯
1989-12-01
现行
SAE J2963_201810
Summary of Stop Lamp-Related Federal Motor Vehicle Safety Standards and NHTSA Interpretations, Relative to ATC, Stability Control Interventions, Engine Retarders/Exhaust Brakes
与ATC、稳定性控制干预、发动机减速器/排气制动器相关的停车灯相关联邦机动车安全标准和NHTSA解释摘要
2018-10-02