首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM D3792-16(2022)
到馆提醒
收藏跟踪
购买正版
Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph 直接注入气相色谱仪测定涂层含水量的标准试验方法
发布日期: 2022-12-01
1.1 本试验方法用于测定水性涂料的总含水量。已对乳胶体系(苯乙烯-丁二烯、聚醋酸乙烯酯-丙烯酸、丙烯酸)、环氧-丙烯酸树脂体系和丙烯酸体系进行了评估。该测试方法的既定工作范围为15 % 至90 %. 没有理由相信它不会在这个范围之外工作。 1.2 以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.3 本标准并不旨在解决与其使用相关的所有安全问题(如有)。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践,并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《国际标准、指南和建议制定原则决定》中确立的国际公认标准化原则制定的。 =====意义和用途====== 4.1 为了计算水性涂料中的挥发性有机物含量(VOC),需要知道水含量。这种气相色谱测试方法提供了一种相对简单和直接的方法来测定水含量。
1.1 This test method is for the determination of the total water content of waterborne paints. It has been evaluated for latex systems (styrene-butadiene, poly(vinylacetate)-acrylic, acrylic), epoxy acrylic resin systems and acrylic systems. The established working range of this test method is from 15 % to 90 %. There is no reason to believe that it will not work outside of this range. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 In order to calculate volatile organic content (VOC) in waterborne paints, it is necessary to know the water content. This gas chromatographic test method provides a relatively simple and direct way to determine water content.
分类信息
关联关系
研制信息
归口单位: D01.21
相似标准/计划/法规