BS ISO 12151-3:2021-液压传动和一般用途的连接软管接头-国家数字标准馆

现行 BS ISO 12151-3:2021

到馆提醒

收藏跟踪

购买正版

Connections for hydraulic fluid power and general use. Hose fittings-Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends 液压传动和一般用途的连接软管接头

发布日期： 2021-11-29

本文件规定了碳钢制法兰软管配件设计和性能的一般要求和尺寸要求，符合ISO 4397，标称软管内径为12.5 mm至76 mm（含），用于符合ISO 6162-1和ISO 6162-2的端口和夹具。购买本文件时可获得的所有当前修订均包含在购买本文件中。

This document specifies the general and dimensional requirements for the design and performance of flange hose fittings, made of carbon steel, for nominal hose inside diameters of 12,5 mm to 76 mm inclusive, in accordance with ISO 4397, for use with ports and clamps in accordance with ISO 6162-1 and ISO 6162-2.All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS ISO 12151-4-2007

Connections for hydraulic fluid power and general use. Hose fittings-Hose fittings with ISO 6149 metric stud ends
液压传动和一般用途的连接软管接头

BS ISO 12151-5-2007

Connections for hydraulic fluid power and general use. Hose fittings-Hose fittings with ISO 8434-2 37° flared ends
液压传动和一般用途的连接软管接头

BS ISO 12151-6-2009

Connections for hydraulic fluid power and general use. Hose fittings-Hose fittings with ISO 8434-6 60° cone ends
液压传动和一般用途的连接软管接头

GB/T 9065.2-2010

液压软管接头第2部分：24°锥密封端软管接头
Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with 24° cone connector ends

GB/T 9065.5-2010

液压软管接头第5部分：37°扩口端软管接头
Connections for hydraulic fluid power and general use - Hose fittings - Part 5: Hose fittings with 37°degree flared ends

ISO 12151-4-2007

Connections for hydraulic fluid power and general use — Hose fittings — Part 4: Hose fittings with ISO 6149 metric stud ends
液压传动和通用连接件——软管接头第4部分:带ISO 6149公制螺柱端头的软管接头

BS ISO 12151-1-2010+A1-2017

Connections for hydraulic fluid power and general use. Hose fittings-Hose fittings with ISO 8434-3 O-ring face seal ends
液压传动和一般用途的连接软管接头

ISO 12151-5-2007

Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
液压传动和通用连接件——软管配件第5部分:带ISO 8434-2 37度扩口端的软管配件

ISO 12151-6-2009

Connections for hydraulic fluid power and general use — Hose fittings — Part 6: Hose fittings with ISO 8434-6 60 degree cone ends
液压传动和通用连接件——软管接头第6部分:带ISO 8434-6 60度锥形端的软管接头

GB/T 9065.3-2020

液压传动连接软管接头第3部分：法兰式
Connections for hydraulic fluid power—Hose fittings—Part 3: Flange ends

GB/T 9065.4-2020

液压传动连接软管接头第4部分：螺柱端
Connections for hydraulic fluid power—Hose fittings—Part 4: Stud ends

ISO 12151-3-2021

Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
液压传动和通用连接件.软管接头.第3部分:带ISO 6162-1或ISO 6162-2法兰端的软管接头

ISO 12151-1-2010

Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
液压传动和通用连接件——软管接头第1部分:带ISO 8434-3 O形圈端面密封端的软管接头

GOST R 54482-2011

Соединения для гидравлических силовых систем общего применения. Фитинги шланговые с метрическими ввертными концами и О-образным уплотнительным кольцом. Технические требования
用于通用液压流体动力的管道连接带公制螺栓端头和O形圈的软管接头技术要求

GB/T 9065.6-2020

液压传动连接软管接头第6部分：60°锥形
Connections for hydraulic fluid power—Hose fittings—Part 6: 60° cone ends

ISO 12151-2-2022

Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings
液压传动和通用连接件.软管配件.第2部分:带ISO 8434-1 24°锥形连接器端部和O形圈的软管配件

BS EN ISO 19879-2021

Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
流体动力和一般用途的金属管接头液压流体动力连接的试验方法

Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections
用于流体动力和一般用途的金属管连接 - 液压流体动力连接的测试方法

ISO 12151-1-2010/Amd 1-2017

Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends — Amendment 1
液压传动和通用连接件.软管接头.第1部分:带ISO 8434-3 O形圈端面密封端的软管接头.修改件1

SAE J1502_202205

Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic
液压动力和一般用途的连接-液压联轴器-诊断

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统