Thermoplastics pipes and fittings — Water absorption — Part 1: General test method
热塑性塑料管道和配件——吸水率第1部分:通用试验方法

1991-09-05

Thermoplastics pipes and fittings — Water absorption — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
热塑性塑料管道和配件——吸水性第3部分:丙烯腈/丁二烯/苯乙烯（ABS）管道和配件的试验条件

1991-09-05

Трубы и соединительные детали из термопластов. Температура размягчения по Вика. Часть 2. Условия испытания труб и соединительных деталей из непластифицированного поливинилхлорида, хлорированного поливинилхлорида и труб из ударопрочного поливинилхлорида
热塑性塑料管和配件 维卡软化温度 第2部分未增塑聚氯乙烯 氯化聚氯乙烯管道和配件以及高冲击聚氯乙烯管道的试验条件

유체이송용 열가소성 플라스틱관, 이음관 및 조립품 — 내압저항성의 평가 — 제2부: 관 시험편 제작
用于输送流体的热塑性塑料管道 配件和组件 - 耐内压的测定 - 第2部分:管道试件的制备

2014-10-23

Трубы, соединительные детали и узлы соединений из термопластов для транспортирования жидких и газообразных сред. Определение стойкости к внутреннему давлению. Часть 2. Подготовка образцов труб
用于运输流体的热塑性塑料管道 配件和组件 测定内压耐受性 第二部分管件试件的制备

2013-12-27

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
流体输送用热塑性塑料管、配件和组件——耐内压性的测定第2部分:管道试件的制备

2006-01-30

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
球墨铸铁管、配件和附件.球墨铸铁管和配件有机衬里的要求和试验方法.第2部分:热塑性酸改性聚烯烃（TMPO）管道衬里；德文版EN 15655-2:2020

2021-01-01

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
流体输送用热塑性塑料管、配件和组件.耐内压性的测定.第2部分:管道试样的制备（ISO 1167-2-2006）；德文版EN ISO 1167-2:2006

2006-05-01

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
流体输送用热塑性塑料管、配件和组件.耐内压性的测定.第2部分:管道试样的制备（ISO 1167-2-2006）

2006-10-11

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
球墨铸铁管、配件和附件.球墨铸铁管配件和附件有机涂层的要求和试验方法.第2部分:热塑性酸改性聚烯烃涂层（TMPO）

2020-02-01

열가소성 플라스틱 관 및 이음관－ 비카트 연화 온도－제2부：무가소화 폴리염화비닐(PVC－U), 염소화 폴리염화비닐(PVC－C) 관 및 이음관, 내충격성 폴리염화비닐(PVC－HI) 관에 대한 시험 조건
热塑性塑料管道和配件－维卡软化温度？第2部分:高抗冲击聚氯乙烯（PVC－HI）管用未增塑聚氯乙烯（PVC－U）或氯化聚氯乙烯（PVC－C）管及配件的试验条件

2005-12-29

Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
热塑性塑料管道和配件——维卡软化温度第2部分:未增塑聚氯乙烯（PVC-U）或氯化聚氯乙烯（PVC-C）管道和配件以及高抗冲击聚氯乙烯（PVC-HI）管道的试验条件

1995-02-02

Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
热塑性塑料管和配件维卡软化温度第2部分:未增塑聚氯乙烯（PVC-U）或氯化聚氯乙烯（PVC-C）管和配件及高抗冲击聚氯乙烯（PVC-HI）管的试验条件

2018-01-01