1.1 本规范适用于夹持式带电工具，以确保制造工艺和材料兼容，并且在装配过程中不会发生部件劣化。 1.2 本规范规定了夹持器的技术特性。 1.3 本规范适用于中空和泡沫填充夹持器。 1.4 以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.5 以下安全隐患警告仅适用于本规范的测试部分: 本标准并非旨在解决与其使用相关的所有安全问题（如有）。 本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定适用的监管限制。 1.6 本设备的使用、维护和在役测试不在本规范范围内。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification applies to the Clampstick type live line tools to ensure manufacturing processes and materials are compatible and no deterioration of components occur during the assembly process. 1.2 This specification establishes the technical characteristics for clampsticks. 1.3 This specification applies to clampsticks both hollow and foam-filled. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 The following safety hazards caveat pertains only to the test portions of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicable of regulatory limitations prior to use. 1.6 The use, maintenance, and in-service testing of this equipment is beyond the scope of this specification. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.