首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM C953-24
到馆提醒
收藏跟踪
购买正版
Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory 实验室中预制骨料混凝土灌浆凝固时间的标准试验方法
发布日期: 2024-07-01
1.1 本方法包括使用维卡仪测定预制骨料(PA)混凝土中使用的水硬性水泥浆混合物的凝结时间。 1.2 本标准的文本是指提供解释性材料的注释和脚注。这些注释和脚注(不包括表格和图表中的注释和脚注)不应被视为本标准的要求。 1.3 以国际单位制表示的值应被视为标准值。本标准不包括其他计量单位。 1.4 本标准并不旨在解决与其使用相关的所有安全问题(如果有的话)。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践,并确定监管限制的适用性。 警告-- 新鲜的水硬性水泥混合物具有腐蚀性,长时间接触可能会对皮肤和组织造成化学灼伤。 2. 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 =====意义和用途====== 5.1 该试验方法确定了混合到PA混凝土中使用所需流体稠度的水泥浆的凝固时间。 5.2 凝固时间也有助于确定必须混合到生产PA混凝土所需的流体稠度的水泥浆成分的可接受性。
1.1 This method covers the determination test of time of setting of hydraulic cement grout mixtures used in preplaced-aggregate (PA) concrete using the Vicat apparatus. 1.2 The text of this standard refers to notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this standard. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Warning— Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure. 2 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 This test method determines the time of setting of grout mixed to the fluid consistency required for its use in PA concrete. 5.2 The time of setting is also useful in determining the acceptability of components of grout that must be mixed to the fluid consistency required for production of PA concrete.
分类信息
关联关系
研制信息
归口单位: C09.41
相似标准/计划/法规