Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick, PWHT Condition, IN521, ER90S-B3, and E9
1/8至1/2英寸铬钼钢（M-5A/P-5A）的气体保护钨极电弧焊（自耗镶块根部）和金属保护电弧焊的标准焊接工艺规范（SWPS） 厚 如焊接状态；1/8至1-1/2英寸 厚度、焊后热处理条件、IN521、ER90S-B3和E9

1999-12-08

Standard WPS for Gas Tungsten Arc Welding with Consumable Inserts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1 1/2" Thick, INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe App.
1/8至1/2“厚、INMs-1、ER70S-2和E7018的碳钢（M-1/P-1/S-1 第1组或第2组）在焊态或焊后热处理状态下用自耗嵌件进行钨极气体保护焊的标准WPS 主要用于管道应用

2001-10-31

Standard WPS for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1 1/2" Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications
1/8至1/2“厚、INMs-1和ER70S-2的碳钢（M-1/P-1/S-1 第1组或第2组）自耗插入件的气体保护钨极电弧焊标准焊接工艺规程 焊态或焊后热处理条件下 主要用于管道应用

2012-03-29

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
海军应用标准焊接工艺规范（SWPS-N） 在焊接状态下 采用1/8英寸[3 mm]至1-1/2英寸[38 mm]厚的MIL-3XX奥氏体不锈钢（S-8）自耗镶块根部进行钨极气体保护焊 主要用于海军应用的管道

2018-08-03

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 3/4 in. Thick, PWHT Condition, IN521 and ER90S-B3, Primarily Pipe Applications
1/8至1/2英寸铬钼钢（M-5A/P-5A）的钨极气体保护焊（自耗镶块根部）标准焊接工艺规范（SWPS） 厚 如焊接状态；1/8至3/4英寸 厚度 焊后热处理条件 IN521和ER90S-B3 主要用于管道应用

1999-12-08

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-MS-1 and MIL-70S-2, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications
海军应用标准焊接工艺规范（SWPS-N） 在焊态或焊后热处理条件下 使用1/8英寸[3毫米]至1-1/2英寸[38毫米]厚的碳钢（S-1）自耗镶块根部进行钨极气体保护焊 MIL-MS-1和MIL-70S-2 主要用于海军应用的管道

2018-08-03

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-MS-1 and MIL-70S-2, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications
海军应用标准焊接工艺规范（SWPS-N） 在焊态或焊后热处理条件下 使用1/8英寸[3毫米]至1-1/2英寸[38毫米]厚的碳钢（S-1）自耗镶块根部进行钨极气体保护焊 MIL-MS-1和MIL-70S-2 主要用于海军应用的管道

2018-08-03

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, IN309 and ER309(L), As-Welded Condition, Primarily Pipe Applicati
用碳钢（M-1/P-1/S-1 第1或2组）自耗镶块根部与奥氏体不锈钢（M-8/P-8/S-8 第1组）进行钨极气体保护焊的标准焊接工艺规范（SWPS） 1/16至1-1/2英寸厚 IN309和ER309（L） 焊态 主要用于管道应用

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN309, ER309 and E309-15
《1/8至1-1/2英寸厚、IN309、ER309和E309-15奥氏体不锈钢（M-8/P-8/S-8 第1组或第2组）与碳钢（M-1/P-1/S-1 第1或第2组）的气体保护钨极电弧焊及自耗镶块根部的标准焊接工艺规范》（SWPS）