现行

DIN ISO 7801

Metallic Materials - Wire - Reverse bend test (ISO 7801:1984)
金属材料线材反向弯曲试验

2008-10-01

现行

BS 08/30164186 DC

BS ISO 5173. Destructive tests on welds in metallic materials. Bend tests
BS ISO 5173 金属材料焊缝的破坏性试验 弯曲试验

2008-01-30

现行

DIN EN ISO 8491

Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998)
金属材料管子（全断面）弯曲试验；德文版EN ISO 8491:2004

2004-10-01

现行

UNE-EN ISO 8491-2006

Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998)
金属材料管子（全断面）弯曲试验

2006-02-22

现行

UNE-EN ISO 6506-1-2006

Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2005)
金属材料布氏硬度试验第1部分:试验方法

2006-12-27

现行

UNE-EN ISO 4545-1-2006

Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2005)
金属材料努氏硬度试验第1部分:试验方法

2006-11-15

现行

AS 1816.1-2007

Metallic materials - Brinell hardness test, Method 1: Test method (ISO 6506-1:2005, MOD)
金属材料.布氏硬度试验 方法1:试验方法（ISO 6506-1-2005 MOD）

2007-03-16

现行

UNE-EN ISO 7799-2000

METALLIC MATERIALS. SHEET AND STRIP 3 MM THICK OR LESS. REVERSE BEND TEST (ISO 7799:1985)
金属材料 厚度小于等于3 MM的薄板和带材 反向弯曲试验（ISO 7799-1985）

2000-11-15

现行

UNE-EN ISO 6506-2-2007

Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2005)
金属材料布氏硬度试验第2部分:试验机的验证和校准

2007-04-18

现行

UNE-EN ISO 6507-2-2007

Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2005)
金属材料维氏硬度试验第2部分:试验机的验证和校准

2007-02-21

现行

UNE-EN ISO 6507-4-2007

Metallic materials - Vickers hardness test - Part 4: Tables and hardness values (ISO 6507-4:2005)
金属材料维氏硬度试验第4部分:表和硬度值

2007-02-28

现行

UNE-EN ISO 6506-4-2007

Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2005)
金属材料布氏硬度试验第4部分:硬度值表

2007-04-18

现行

UNE-EN ISO 6507-3-2007

Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2005)
金属材料维氏硬度试验第3部分:标准试块的校准

2007-02-28

现行

UNE-EN ISO 6506-3-2007

Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2005)
金属材料布氏硬度试验第3部分:标准试块的校准

2007-04-18

现行

DIN EN ISO 7799

Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); English version of DIN EN ISO 7799
金属材料厚度小于等于3mm的薄板和带材反向弯曲试验；德文版EN ISO 7799:2000

2000-07-01

现行

DIN ISO 22826

Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
金属材料焊缝的破坏性试验.激光和电子束焊接窄接头的硬度试验（维氏和努氏硬度试验）（ISO 22826-2005）

2008-08-01

现行

DIN EN ISO 15614-10

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbaric dry welding (ISO 15614-10:2005)
金属材料焊接工艺的规范和评定.焊接工艺试验.第10部分:高压干焊（ISO 15614-10-2005）；德文版EN ISO 15614-10:2005

2005-09-01

现行

UNE-EN ISO 15614-10-2005

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbaric dry welding (ISO 15614-10:2005)
金属材料焊接工艺的规范和评定焊接工艺试验第10部分:高压干焊

2005-12-21

现行

DIN EN ISO 17642-3

Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005)
金属材料焊缝的破坏性试验.焊接件的冷裂纹试验.电弧焊工艺.第3部分:外载试验（ISO 17642-3-2005）；德文版EN ISO 17642-3:2005

2005-09-01

现行

DIN EN ISO 17642-2

Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17642-2:2005)
金属材料焊缝的破坏性试验.焊接件的冷裂纹试验.电弧焊工艺.第2部分:自我约束试验（ISO 17642-2-2005）；德文版EN ISO 17642-2:2005

2005-09-01