首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ISO 3548-1:2022
到馆阅读
收藏跟踪
购买正版
Plain bearings — Thin-walled half bearings with or without flange — Part 1: Tolerances, design features and methods of test 滑动轴承.带或不带法兰的薄壁半轴承.第1部分:公差、设计特点和试验方法
发布日期: 2022-08-15
本文件规定了外径不超过Do的带整体法兰的薄壁半轴承的公差、设计特点和试验方法?=?250?毫米,不带法兰,外径不超过Do?=?500?嗯。然而,由于设计的多样性,不可能使半轴承的尺寸标准化。 根据该文献的半轴承主要用于往复式机械中,并且由钢背衬和内部的一个或多个轴承金属层组成。 在往复式机械中,带法兰的半轴承可以与不带法兰的半轴承结合使用。 或者,为了用作带凸缘的半轴承,根据ISO?6526,或带有组装法兰的半轴承。 笔记?所有尺寸和公差均以毫米为单位。
This document specifies tolerances, design features and test methods for thin-walled half bearings with integral flange up to an outside diameter of Do = 250 mm and without flange up to an outside diameter of Do = 500 mm. Due to the variety of design, it is, however, not possible to standardize the dimensions of the half bearings. Half bearings according to this document are predominantly used in reciprocating machinery and consist of a steel backing and one or more bearing metal layers on the inside. In reciprocating machinery, flanged half bearings can be used in connection with half bearings without flange. Alternatively, to serve as a flanged half bearing, it is possible to use a half bearing without flange together with two separate half thrust washers according to ISO 6526, or a half bearing with assembled flanges. NOTE       All dimensions and tolerances are given in millimetres.
分类信息
关联关系
研制信息
归口单位: ISO/TC 123/SC 3
相似标准/计划/法规
现行
BS ISO 3548-2-2020
Plain bearings. Thin-walled half bearings with or without flange-Measurement of wall thickness and flange thickness
滑动轴承 带或不带法兰的薄壁半轴承
2020-09-15
现行
GB/T 42614-2023
滑动轴承 金属无法兰薄壁轴瓦 σ0.01*极限值的测定
Plain bearings—Metallic thin-walled half bearings without flange—Determination of the σ0.01*-limit
2023-05-23
现行
GB/T 7308.2-2021
滑动轴承 有法兰或无法兰薄壁轴瓦 第2部分:轴瓦壁厚和法兰厚度测量
Plain bearings—Thin-walled half bearings with or without flange—Part 2: Measurement of wall thickness and flange thickness
2021-03-09
现行
ISO 3548-2-2020
Plain bearings — Thin-walled half bearings with or without flange — Part 2: Measurement of wall thickness and flange thickness
滑动轴承 - 带或不带法兰的薄壁半轴承 - 第2部分:壁厚和法兰厚度的测量
2020-09-09
现行
GOST ISO 3548-2002
Подшипники скольжения. Вкладыши тонкостенные с буртом или без него. Допуски, особенности конструкции и методы контроля
滑动轴承 带或不带法兰的薄壁半轴承 公差 设计特点和检查方法
2002-05-30
现行
GB/T 7308.3-2021
滑动轴承 有法兰或无法兰薄壁轴瓦 第3部分:周长测量
Plain bearings—Thin-walled half bearings with or without flange—Part 3: Measurement of peripheral length
2021-03-09
现行
ISO 3548-3-2023
Plain bearings — Thin-walled half bearings with or without flange — Part 3: Determination of the peripheral length
滑动轴承.带或不带法兰的薄壁半轴承.第3部分:周长的测定
2023-03-16
现行
GB/T 7308.1-2021
滑动轴承 有法兰或无法兰薄壁轴瓦 第1部分:公差、结构要素和检验方法
Plain bearings—Thin-walled half bearings with or without flange—Part 1:Tolerances, design features and methods of test
2021-03-09
现行
GOST ISO 12306-1996
Подшипники скольжения. Измерение толщины стенок тонкостенных вкладышей и тонкостенных сплошных и свертных втулок
滑动轴承 薄壁半轴承和薄壁衬套的壁厚测量
1996-10-04
现行
DIN ISO 3548
Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test (ISO 3548:1999)
滑动轴承带或不带法兰的薄壁半轴承公差、设计特征和试验方法
2001-04-01
现行
BS 7675-1993
Plain bearings. Thin-walled half bearings. Checking of peripheral length
滑动轴承 薄壁半轴承 检查周长
1993-07-15
现行
GOST ISO 6524-1995
Подшипники скольжения. Контроль длины развертки тонкостенных вкладышей
滑动轴承 薄壁半轴承的外围长度检查
1995-11-28
现行
ISO 3548-1-2022/Amd 1-2024
Plain bearings — Thin-walled half bearings with or without flange — Part 1: Tolerances, design features and methods of test — Amendment 1
滑动轴承带或不带法兰的薄壁半轴承第1部分:公差、设计特点和试验方法修改件1
2024-04-24
现行
KS B ISO 12132
플레인 베어링 — 얇은 벽 분할 베어링의 품질보증 — 고장모드 영향분석(FMEA) 설계
滑动轴承.薄壁半轴承的质量保证.设计FMEA
2022-12-14
现行
KS B ISO 12132
플레인 베어링 — 얇은 벽 분할 베어링의 품질보증 — FMEA 설계
平面轴承 - 薄壁半轴承的质量保证 - 设计Fmea
2017-12-29
现行
KS B ISO 12132(2022 Confirm)
플레인 베어링 — 얇은 벽 분할 베어링의 품질보증 — FMEA 설계
滑动轴承.薄壁半轴承的质量保证.设计FMEA
2017-12-29
现行
BS ISO 6282-2018
Plain bearings. Metallic thin-walled half bearings. Determination of the 0,01*-limit
滑动轴承 金属薄壁半轴承 0,01*极限的确定
2018-07-02
现行
BS ISO 12132-2017
Plain bearings. Quality assurance of thin-walled half bearings. Design FMEA
滑动轴承 薄壁半轴承的质量保证 设计FMEA
2017-03-31
现行
GB/T 23896-2009
滑动轴承 薄壁轴瓦质量保证 设计阶段的失效模式和效应分析(FMEA)
Plain bearings - Quality assurance of thin - Walled half bearings - Design FMEA
2009-05-26
现行
ISO 12132-2017
Plain bearings — Quality assurance of thin-walled half bearings — Design FMEA
平面轴承 - 薄壁半轴承的质量保证 - 设计Fmea
2017-03-20