本文件规定了一种测试方法，用于测量水平安装的阻燃纺织材料暴露于对流和辐射热组合时的传热。将暴露条件调整为大约50/50纯对流热和纯辐射热的混合物。总暴露热通量为84 kW/m2。 当所有结构或子组件均由阻燃材料制成时，本试验方法适用于用作单层或多层结构的任何类型的板材。它不适用于不耐火的材料。 本试验方法不适用于评估暴露于任何其他类型热能源（如仅辐射热或仅火焰接触）的材料。ISO 6942仅适用于评估暴露于辐射热的材料。 ISO 9151仅适用于评估因火焰接触而产生的材料。 注:一些（但不是全部）纺织品材料在暴露于本试验方法产生的对流和辐射热后会着火并继续燃烧。交叉引用:ISO 139ISO 6942IEC 60584-1:1977ISO 9151购买本文件时可获得的所有现行修订均包含在购买本文件中。

This document specifies a test method for measuring the heat transferred through horizontally mounted flame-resistant textile materials when exposed to a combination of convective and radiant heat. The exposure conditions are adjusted to be approximately a 50/50 mixture of pure convective heat and pure radiant heat. The total exposure heat flux is 84 kW/m2. This test method is applicable to any type of sheet material used either as a single layer or in a multilayer construction when all structures or sub-assemblies are made of flame-resistant materials. It does not apply to materials that are not flame resistant. This test method does not apply to the evaluation of materials exposed to any other type of thermal energy sources, such as radiant heat only or flame contact only. ISO 6942 is applicable when evaluating materials for exposure to radiant heat only. ISO 9151 is applicable when evaluating materials due to flame contact only. NOTE Some, but not all, textiles materials can ignite and continue to burn after exposure to the convective and radiant heat produced by this test method.Cross References:ISO 139ISO 6942IEC 60584-1:1977ISO 9151All current amendments available at time of purchase are included with the purchase of this document.