ISO 10360-8:2013规定了在制造商规定的测量长度时验证CMM（坐标测量机）的性能的验收测试。它还指定重新验证测试，使用户能够定期重新验证CMM的性能。验收和重新验证测试仅适用于带有光学距离传感器的笛卡尔立方体测距仪。虽然它没有明确适用于非笛卡尔计量单位，但双方可以通过相互协议将ISO 10360-8:2013申请给非笛卡尔坐标测量机。 它不适用于测量体积明显小于测试球体尺寸的CMM。然而，所述测试的原理，文艺和程序对于这些CMM的验收和重新验证测试是有用的？或者是修改参数，例如测试伪影的大小和测量次数。 ISO 10360-8:2013规定了可由制造商或CMM用户分配的性能要求，执行接受和重新验证测试的方式，以证明所述要求，验证一致性的规则，以及验收并且可以使用重新验证测试

ISO 10360-8:2013 specifies the acceptance tests for verifying the performance of a CMM (coordinate measuring machine) when measuring lengths as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the CMM. The acceptance and reverification tests are applicable only to Cartesian CMMs with optical distance sensors. While it does not explicitly apply to non-Cartesian CMMs, the parties may apply ISO 10360-8:2013 to non-Cartesian CMMs by mutual agreement. It is not intended to be applicable to CMMs whose measuring volume is significantly smaller than the size of the test sphere. However, the principle, artefacts and procedure of the test described are useful for the acceptance and reverification tests of those CMMs?either as it is or with modifying the parameters such as the size of the test artefacts and the number of measurements. ISO 10360-8:2013 specifies performance requirements that can be assigned by the manufacturer or the user of the CMM, the manner of execution of the acceptance and reverification tests to demonstrate the stated requirements, rules for verifying conformance, and applications for which the acceptance and reverification tests can be used.