BS ISO 10649-5:2012-带平行键和榫传动的刀杆-国家数字标准馆

现行 BS ISO 10649-5:2012

到馆阅读

收藏跟踪

购买正版

Cutter arbors with parallel key and tenon drive-Dimensions and designation of tool holders with polygonal taper interface with flange contact surface 带平行键和榫传动的刀杆

发布日期： 2012-09-30

交叉引用:ISO 2768-1ISO 2768-2ISO 2780ISO 10643ISO 10649-1ISO 26623-1ISO 13399-1ISO/TS 13399-2ISO/TS 13399-3ISO/TS 13399-4ISO/TS 13399-5ISO/TS 13399-50ISO/TS 13399-60ISO/TS 13399-100ISO/TS 13399-150购买本文件时可提供的所有当前修订。

Cross References:ISO 2768-1ISO 2768-2ISO 2780ISO 10643ISO 10649-1ISO 26623-1ISO 13399-1ISO/TS 13399-2ISO/TS 13399-3ISO/TS 13399-4ISO/TS 13399-5ISO/TS 13399-50ISO/TS 13399-60ISO/TS 13399-100ISO/TS 13399-150All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS ISO 10649-1-2013

Cutter arbors with parallel key and tenon drive-General dimensions
带平行键和榫传动的刀杆

Dimensions of accessories for cutter arbors with parallel key and tenon drive
具有平行键和榫头驱动的刀柄配件尺寸

GB/T 37895-2019

带平键和端键传动铣刀杆附件的尺寸
Dimensions of accessories for cutter arbors with parallel key and tenon drive

ISO 10649-1-2013

Cutter arbors with parallel key and tenon drive — Part 1: General dimensions
平行键榫传动刀杆第1部分:一般尺寸

GB/T 37891.1-2019

带平键和端键传动的铣刀杆第1部分：通用尺寸
Cutter arbors with parallel key and tenon drive—Part 1: General dimensions

BS 09/30190856 DC

BS ISO 10649-1. Cutter arbors with parallel key and tenon drive. Part 1. General dimensions
英国标准ISO 10649-1 具有平行键和榫头驱动的刀杆第一部分一般尺寸

BS ISO 10649-2-2013

Cutter arbors with parallel key and tenon drive-Dimensions and designation of tool holders with taper interface with flange contact surface
带平行键和榫传动的刀杆

GOST 32832.1-2014

Оправки с продольной шпонкой и поводковым срезом для насадных фрез. Часть 1. Основные размеры
具有纵向钥匙和榫头驱动器的壳体切割器基本尺寸

BS ISO 10649-3-2013

Cutter arbors with parallel key and tenon drive-Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
带平行键和榫传动的刀杆

BS ISO 10649-6-2012

Cutter arbors with parallel key and tenon drive-Dimensions and designation of tool holders with modular taper interface with ball track system
带平行键和榫传动的刀杆

ISO 10649-2-2013

Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
平行键榫传动刀杆第2部分:带法兰接触面的锥面刀架的尺寸和名称

BS ISO 10649-4-2013

Cutter arbors with parallel key and tenon drive-Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
带平行键和榫传动的刀杆

ISO 10649-3-2013

Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
平行键榫传动刀杆第3部分:自动换刀器用7/24锥度刀架的尺寸和名称

GB/T 37891.3-2019

带平键和端键传动的铣刀杆第3部分：带7:24自动换刀圆锥柄刀杆的尺寸和标记
Cutter arbors with parallel key and tenon drive—Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers

GB/T 37891.6-2019

带平键和端键传动的铣刀杆第6部分：带钢球拉紧系统的模块圆锥柄刀杆的尺寸和标记
Cutter arbors with parallel key and tenon drive—Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system

GB/T 37891.2-2019

带平键和端键传动的铣刀杆第2部分：带法兰接触面的空心圆锥柄刀杆的尺寸和标记
Cutter arbors with parallel key and tenon drive—Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface

ISO 10649-6-2012

Cutter arbors with parallel key and tenon drive — Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system
带平行键和榫传动的刀杆第6部分:带滚珠导轨系统的模块化锥度接口刀架的尺寸和名称

ISO 10649-5-2012

Cutter arbors with parallel key and tenon drive — Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
平行键榫传动刀杆第5部分:带法兰接触面的多边形锥面刀架的尺寸和名称

GB/T 37891.5-2019

带平键和端键传动的铣刀杆第5部分：带法兰接触面的多棱锥柄刀杆的尺寸和标记
Cutter arbors with parallel key and tenon drive—Part 5:Dimensions and designation of tool holders with polygonal taper interface with flange contact surface

ISO 10649-4-2013

Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
平行键榫传动刀杆第4部分:不带自动换刀器的7/24锥度刀架的尺寸和名称

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统