ISO 683-5:2017给出了以下技术交付要求: -半成品，如初轧坯、钢坯、板坯（见注1）， -钢筋（见注1）， -线材， -热轧钢板（见注2），以及 -锤锻或落锻（见注1） 由表3中列出的氮化钢制造，并在表1第2至5行中不同类型产品的一种热处理条件和表2中给出的一种表面条件下供应。 这些钢通常用于制造淬火和回火以及随后的渗氮机械零件。 本文件中给出的机械性能要求仅限于表6中给出的尺寸。 注1:锤锻半成品（初轧坯、钢坯、板坯等）、无缝轧制环件和锤锻棒材包含在以下半成品或棒材中，而不包含在术语“锤锻和落锻”中。 注2:除非另有说明，否则术语“板”也包括宽平面。 在特殊情况下，这些技术交付要求的变更或对这些要求的补充可在询价和订购时形成协议（见5）。 2和附件B）。 除本文件外，ISO 404的一般技术交付要求也适用。

ISO 683-5:2017 gives the technical delivery requirements for - semi-finished products, e.g. blooms, billets, slabs (see note 1), - bars (see note 1), - wire rod, - hot-rolled plates (see note 2), and - hammer or drop forgings (see note 1) manufactured from the nitriding steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1, rows 2 to 5, and in one of the surface conditions given in Table 2. The steels are generally intended for the fabrication of quenched and tempered and, subsequently, nitriding machine parts. The requirements for mechanical properties given in this document are restricted to the sizes given in Table 6. NOTE 1 Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are in the following covered under semi-finished products or bars and not under the term "hammer and drop forgings". NOTE 2 The term "plate" includes in the following also wide flats unless otherwise stated. In special cases, variations in these technical delivery requirements or additions to these requirements can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B). In addition to this document, the general technical delivery requirements of ISO 404 are applicable.