BS ISO/IEC 29341-30-2:2017定义了物联网管理和控制设备，该设备标识了1级 一款名为物联网管理和控制的设备。这个公开的规范是 适用于UPnP论坛的标准化DCP，包括该设备。该设备定义符合UPnP设备架构1.0版[1]。信息技术 定义此处称为物联网管理和控制设备的设备类型。本规范定义了一种通用设备，可用于实例化桥梁或桥梁 连接到传感器和执行器的网关设备。 这个设备实现了桥接 在UPnP网络和传感器/执行器端点之间。它公开了要检查的服务 状态，并从传感器发送和接收数据。可以连接传感器/执行器 使用多种传输协议，包括蓝牙、ZigBee和IEEE 11073。交叉引用:IETF RFC 2119:1997购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS ISO/IEC 29341-30-2:2017 defines the device for IOT Management and Control, which identifies Level 1 of the device named IOT Management and Control. This Publicly Available Specification is applicable to Standardized DCPs of the UPnP Forum which include this device.This device definition is compliant with the UPnP Device Architecture version 1.0 [1]. It defines a device type referred to herein as IOT Management and Control device.This specification defines a general-purpose device that can be used to instantiate a bridge or gateway device that is connected to Sensors and Actuators. This device implements a bridge between the UPnP network and Sensors/Actuators endpoints. It exposes services to check the status, and send and receive data from Sensors. Sensors/Actuators may be connected using a variety of transport protocols including Bluetooth, ZigBee and IEEE 11073.Cross References:IETF RFC 2119:1997All current amendments available at time of purchase are included with the purchase of this document.