1.1 本试验方法涵盖金属导电材料电阻率的测定。其精度为±0.30 % 电阻大于等于0.00001Ω（10μΩ）的试样。重量电阻率精度可能会受到导体假设密度可能不准确的不利影响。 1.2 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.3 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This test method covers the determination of the electrical resistivity of metallic electrical conductor material. It provides for an accuracy of ±0.30 % on test specimens having a resistance of 0.00001 Ω (10 μΩ) or more. Weight resistivity accuracy may be adversely affected by possible inaccuracies in the assumed density of the conductor. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.