BS 5350-H2:1982-胶粘剂的试验方法热熔粘合剂的物理试验低温柔韧性或冷裂纹温度的测定-国家数字标准馆

现行 BS 5350-H2:1982

到馆阅读

收藏跟踪

购买正版

Methods of test for adhesives. Physical tests on hot-melt adhesives-Determination of low temperature flexibility or cold crack temperature 胶粘剂的试验方法热熔粘合剂的物理试验低温柔韧性或冷裂纹温度的测定

发布日期： 1982-12-31

描述了一种确定规定尺寸的粘合剂膜在规定温度下是否会开裂、开裂或断裂的程序。或者，确定薄膜开裂、破裂或断裂的温度。该试验要么作为通过/失败试验进行，要么在连续较低的温度下进行，直到发生故障。交叉引用:BS 3900:1974年《工作健康和安全法》第E10部分

Describes a procedure for determining whether a film of adhesive of specified dimensions will craze, crack or fracture at a specified temperature. Alternatively, the temperature at which the film will craze, crack or fracture is determined. The test is carried out either as a pass/fail test or at successively lower temperatures until failure occurs.Cross References:BS 3900:Part E1Health and Safety at Work etc. Act 1974

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS 5350-H3-1984

Methods of test for adhesives. Physical tests on hot-melt adhesives-Determination of heat resistance of hot-melt adhesives
胶粘剂的试验方法热熔胶的物理试验

BS 5350-H4-1984

Methods of test for adhesives. Physical tests on hot-melt adhesives-Determination of maximum open time of hot-melt adhesives (oven method)
胶粘剂的试验方法热熔胶的物理试验

热熔胶粘剂熔融粘度的测定
Testing Methods for Melt Viscosity of Hot-melt Adhesives

JIS K 6862-1984

Testing methods for melt viscosity of hot-melt adhesives
热熔胶熔体粘度的试验方法

BS 5350-H1-1981

Methods of test for adhesives-Determination of heat stability of hot melt adhesives in the application equipment
胶粘剂的试验方法应用设备中热熔胶热稳定性的测定

书刊装订用EVA型热熔胶使用要求及检测方法
The instruction and testing methods of EVA hot-melt adhesives for bookbinding

ASTM D3236-15(2021)

Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
热熔胶和涂料的表观粘度的标准测试方法

BS 5131-1.3-1991

Methods of test for footwear and footwear materials. Adhesives-Preparation of test assemblies using adhesives (other than hot melt adhesives) for heat resistance (creep) and peel tests
鞋类和鞋类材料的试验方法粘合剂

BS 5131-1.7-1991

Methods of test for footwear and footwear materials. Adhesives-Preparation of test assemblies using hot melt adhesives for heat resistance (creep) and peel tests
鞋类和鞋类材料的试验方法粘合剂

BS 5131-1.8-1981

Methods of test for footwear and footwear materials. Adhesives-Rate of bond strength development in shear of hot melt adhesives for lasting
鞋类和鞋类材料的试验方法粘合剂

Standard Practice for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test
用Mandrel Bend Test测定热熔胶的挠性的标准实施规程

ASTM D5100/D5100M-95a(2024)

Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen
矿物集料与热沥青附着力的标准试验方法

GB/T 27934.4-2011

纸质印刷品覆膜过程控制及检测方法第4部分：反应型聚氨酯（PUR）热熔胶即涂覆膜
Lamination process control and testing methods for paper prints - Part 4: Lamination with polyurethane reactive hot melt adhesive

AS 2331.4.1-2001

Methods of test for metallic and related coatings, Method 4.1: Physical tests - Qualitative adhesion tests
金属和相关涂层的试验方法方法4.1:物理试验-定性附着力试验

Hot-setting phenolic and aminoplastic wood adhesives. Classification and test method
热固化酚醛和氨基塑料木材粘合剂分类和试验方法

BS 903-A27-1986

Physical testing of rubber-Determination of rubber to fabric adhesion. Direct tension method
橡胶的物理测试橡胶与织物附着力的测定直接拉伸法

UNE-EN 12697-37-2003

Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA
沥青混合料.热拌沥青的试验方法.第37部分:HRA用预涂层碎屑上粘合剂粘附性的热砂试验

BS EN 13880-10-2018

Hot applied joint sealants-Test method for the determination of adhesion and cohesion following continuous extension and compression
热涂接缝密封剂连续拉伸和压缩后附着力和内聚力测定的试验方法

AS 2313.2.4-2005

Methods of test for single sided and double sided pressure-sensitive adhesive tape, Method 2.4: Physical properties - Thickness
单面和双面压敏胶带的试验方法方法2.4:物理性能-厚度

AS 2313.2.2-2005

Methods of test for single sided and double sided pressure-sensitive adhesion tape, Method 2.2: Physical properties - Elongation
单面和双面压敏胶带的试验方法方法2.2:物理性能-伸长率

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统