首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 MIL MIL-STD-1427A
到馆提醒
收藏跟踪
购买正版
ACTIVATED DESICCANTS (METRIC) (NO S/S DOCUMENT) (SUPERSEDING MIL-STD-1427) 活性干燥剂(公制)(无S/S文件)(替代MIL-STD-1427)
发布日期: 1988-12-14
分类信息
发布单位或类别: 美国-美国军事规范和标准
关联关系
研制信息
相似标准/计划/法规
现行
MIL MIL-STD-1434A
GOGGLES (METRIC) (NO S/S DOCUMENT) (SUPERSEDING MIL-STD-1434)
护目镜(公制)(无S/S文件)(替代MIL-STD-1434)
1988-12-21
现行
MIL MIL-STD-1434A Notice 1-Cancellation
GOGGLES (METRIC) (NO S/S DOCUMENT) (SUPERSEDING MIL-STD-1434)
护目镜(公制)(无S/S文件)(取代MIL-STD-1434)
1995-12-05
现行
MIL MIL-STD-1476C
METRIC SYSTEM APPLICATION IN NEW DESIGN (NO S/S DOCUMENT) (SUPERSEDING MIL-STD-1476B)
公制在新设计中的应用(无S/S文件)(取代MIL-STD-1476B)
1993-09-07
现行
MIL MIL-STD-610B
HALOGENATED HYDROCARBON COMPOUNDS AND SOLVENTS, TECHNICAL GRADE (METRIC) (SUPERSEDING MIL-STD-610A) (NO S/S DOCUMENT)
卤代烃化合物和溶剂 技术等级(公制)(替代MIL-STD-610A)(无S/S文件)
1989-01-10
现行
MIL MIL-STD-612C
INORGANIC BASES AND BASIC ANHYDRIDES, TECHNICAL GRADE (METRIC) (SUPERSEDING MIL-STD-612B) (NO S/S DOCUMENT)
技术等级(公制)无机碱和碱性酸酐(替代MIL-STD-612B)(无S/S文件)
1993-04-16
现行
MIL MIL-STD-612C Notice 1-Cancellation
INORGANIC BASES AND BASIC ANHYDRIDES, TECHNICAL GRADE (METRIC) (SUPERSEDING MIL-STD-612B) (NO S/S DOCUMENT)
工业级无机碱和碱式酸酐(公制)(取代MIL-STD-612B)(无S/S文件)
1998-08-17
现行
MIL MIL-STD-1880A
CYLINDERS, RINGS AND SHROUDS, TUBRBINE, CAST, ACCEPTANCE CRITERIA FOR (METRIC) (NO S/S DOCUMENT) (SUPERSEDING MIL-STD-1880)
筒体、环和护罩、筒体、铸件、验收标准(公制)(无S/S文件)(代替MIL-STD-1880)
1991-12-10
现行
MIL MIL-STD-1880A Notice 2-Cancellation
CYLINDERS, RINGS AND SHROUDS, TUBRBINE, CAST, ACCEPTANCE CRITERIA FOR (METRIC) (NO S/S DOCUMENT) (SUPERSEDING MIL-STD-1880)
铸造筒形圆筒、环和覆环 验收标准(公制)(无S/S文件)(代替MIL-STD-1880)
1993-02-09
现行
MIL MIL-HDBK-53/1A
GUIDE FOR ATTRIBUTE LOT SAMPLING INSPECTION AND MIL-STD-105 (SUPERSEDING MIL-HDBK-53/1) (NO S/S DOCUMENT)
属性批次抽样检验指南和MIL-STD-105(取代MIL-HDBK-53/1)(无S/S文件)
1982-02-01
现行
MIL MIL-HDBK-53/1A Notice 1-Cancellation
GUIDE FOR ATTRIBUTE LOT SAMPLING INSPECTION AND MIL-STD-105 (SUPERSEDING MIL-HDBK-53/1) (NO S/S DOCUMENT)
属性批次抽样检验指南和MIL-STD-105(取代MIL-HDBK-53/1)(无S/S文件)
2002-02-01
现行
DOD DOD-STD-1399/533
INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 533 POTABLE WATER SERVICE (METRIC) (NO S/S DOCUMENT) (SUPERSEDING MIL-STD-1399/104)
船舶系统接口标准第533节饮用水服务(公制)(无S/S文件)(取代MIL-STD-1399/104)
1978-05-22
现行
MIL MIL-S-24725/1A
SWITCH, FIBER OPTIC, HARD MOUNTED, ELECTRICAL NONLATCHING; BYPASS, MULTIMODE CABLE, STAND-ALONE (METRIC) (SUPERSEDING MIL-S-24725/1) (NO S/S DOCUMENT)
非闭锁式硬安装光纤开关;独立多模电缆旁路(公制)(替代MIL-S-24725/1)(无S/S文件)
1994-11-29
现行
MIL MIL-S-24725/1A Notice 1-Cancellation
SWITCH, FIBER OPTIC, HARD MOUNTED, ELECTRICAL NONLATCHING; BYPASS, MULTIMODE CABLE, STAND-ALONE (METRIC) (SUPERSEDING MIL-S-24725/1) (NO S/S DOCUMENT)
非闭锁式硬装光纤开关;旁路 多模电缆 独立(公制)(取代MIL-S-24725/1)(无S/S文件)
2003-01-10
现行
MIL MIL-STD-1226A
ENGINE, GAS, AIR COOLED, IND TYPE, 1-1/2 BHP MILSTD, MODEL 1A08 INSTALL PROC (NO S/S DOCUMENT) (SUPERSEDING MIL-STD-1226)
1-1/2 BHP MILSTD工业用气冷发动机 型号1A08安装程序(无S/S文件)(代替MIL-STD-1226)
1965-10-29
现行
MIL MIL-STD-1226A Notice 2-Cancellation
ENGINE, GAS, AIR COOLED, IND TYPE, 1-1/2 BHP MILSTD, MODEL 1A08 INSTALL PROC (NO S/S DOCUMENT) (SUPERSEDING MIL-STD-1226)
发动机 气冷 IND型 1-1/2 BHP MILSTD 型号1A08安装程序(无S/S文件)(取代MIL-STD-1226)
1995-12-05
现行
MIL MIL-DTL-83538/1A Notice 1-Validation
CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, RECEPTACLE, STORE ASSEMBLY, REMOVABLE CRIMP CONTACTS, SOCKETS, FOR MIL-STD-1760 APPLICATIONS (METRIC) (SUPERSEDING MIL-C-83538/1) (S/S BY MIL-DTL-83538/1B)
MIL-STD-1760应用(公制)(取代MIL-C-83538/1)用圆形脐带式电连接器和附件、插座、存储组件、可拆卸压接触点、插座(S/S BY MIL-DTL-83538/1B)
2003-10-06
现行
MIL MIL-STD-1597A
QUALITY CONTROL OF LIQUID MISSILE PROPELLANTS AT CONTROL STORAGE POINTS ( THE TECHNICAL INFO IN THIS ST,ARD MAY BE FOUND IN TECHNICAL ORDER 42B-1-16 USEFUL IN DETERMINING OR EVALUATING REQUIREMENTS.)(NO S/S DOCUMENT)(SUPERSEDING MIL-STD-1597)
控制储存点液体导弹发射药的质量控制(本标准中的技术信息可在技术命令42B-1-16中找到 用于确定或评估要求 )(无S/S文件)(取代MIL-STD-1597)
1987-02-16
现行
MIL MIL-STD-1597A Notice 2-Cancellation
QUALITY CONTROL OF LIQUID MISSILE PROPELLANTS AT CONTROL STORAGE POINTS ( THE TECHNICAL INFO IN THIS ST,ARD MAY BE FOUND IN TECHNICAL ORDER 42B-1-16 USEFUL IN DETERMINING OR EVALUATING REQUIREMENTS.)(NO S/S DOCUMENT)(SUPERSEDING MIL-STD-1597)
控制储存点的液体导弹推进剂的质量控制(本标准中的技术信息可在技术订单42B-1-16中找到 有助于确定或评估要求)(无S/S文件)(取代MIL-STD-1597)
1997-08-25