IEC 60317-47:2013规定了具有芳香族聚酰亚胺树脂底涂层的240级漆包矩形铜绕组线的要求。本标准涵盖的标称导体尺寸范围为: -宽度:最小。2.0 mm最大16.0 mm； -厚度:最小。最大0.80毫米。5.60毫米。本规范包括1级和2级导线，适用于所有导线。IEC 60317-0-2中给出了宽度和厚度的规定组合以及规定的宽度/厚度比。这第二版取消并取代了1997年出版的第一版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更: -删除范围中的“在某些国家”语句；-载有关于绕组线的一般说明的新子条款，以前是范围的一部分； -载有外观要求的新分条款； -修订第19条“介电耗散系数”中的注释； -新订的第23条，针孔测试。 关键词:漆包矩形铜绕组线要求240级芳香族聚酰亚胺树脂底涂层 本出版物应与.>一并阅读。

IEC 60317-47:2013 specifies the requirements of enamelled rectangular copper winding wire of class 240 with a sole coating of aromatic polyimide resin. The range of nominal conductor dimensions covered by this standard is:
- width: min. 2,0 mm max. 16,0 mm;
- thickness: min. 0,80 mm max. 5,60 mm. Wires of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness, as well as the specified width/thickness ratio, are given in IEC 60317-0-2. This second edition cancels and replaces the first edition published in 1997. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- deletion of the "in some countries" statement in the scope;
- new subclause containing general notes on winding wire, formerly a part of the scope;
- new subclause containing requirements for appearance;
- revision to the notes in Clause 19, Dielectric dissipation factor;
- new Clause 23, Pin hole test. Keywords: requirements of enamelled rectangular copper winding wire, class 240, sole coating of aromatic polyimide resin

This publication is to be read in conjunction with .>