现行

DIN EN 12119

Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling
塑料管道系统.聚乙烯（PE）阀门.耐热循环试验方法；德文版EN 12119:1997

1997-08-01

现行

UNE-EN 12119-1997

PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) VALVES. TEST METHOD FOR RESISTANCE TO THERMAL CYCLING.
塑料管道系统 聚乙烯（PE）阀门 耐热循环的试验方法

1997-11-26

现行

BS EN 12100-1998

Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports
塑料管道系统 聚乙烯（PE）阀门 支架间抗弯曲性的试验方法

1998-02-15

现行

UNE-EN 12100-1998

PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) VALVES. TEST METHOD FOR RESISTANCE TO BENDING BETWEEN SUPPORTS.
塑料管道系统 聚乙烯（PE）阀门 支架间抗弯曲性的试验方法

1998-05-07

现行

BS EN 1555-4-2021

Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)-Valves
气体燃料供应用塑料管道系统 聚乙烯（PE）

2021-12-22

现行

UNE-EN 12201-4-2002

Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves.
供水用塑料管道系统.聚乙烯（PE）.第4部分:阀门

2002-07-29

现行

BS EN 1680-1997

Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism
塑料管道系统 聚乙烯（PE）管道系统用阀门 操作机构弯曲前后密封性的试验方法

1997-07-15

现行

UNE-EN 1680-1997

PLASTICS PIPING SYSTEMS. VALVES FOR POLYETHYLENE (PE) PIPING SYSTEMS. TEST METHOD FOR LEAKTIGHTNESS UNDER AND AFTER BENDING APPLIED TO THE OPERATING MECHANISM.
塑料管道系统 聚乙烯（PE）管道系统用阀门 操作机构弯曲前后密封性的试验方法

1997-11-11

现行

KS M ISO 4437-4

가스 공급용 플라스틱 배관 시스템 ― 폴리에틸렌(PE) ― 제4부: 밸브
气体燃料供应用塑料管道系统聚乙烯（PE）第4部分:阀门

2024-07-10

现行

ISO 4437-4-2022

Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves
气体燃料供应用塑料管道系统.聚乙烯（PE）.第4部分:阀门

2022-11-10

现行

UNE-EN 1555-4-2003

Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves.
气体燃料供应用塑料管道系统.聚乙烯（PE）.第4部分:阀门

2003-03-21

现行

BS EN 12201-4-2012

Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE)-Valves
供水、排水和污水加压用塑料管道系统 聚乙烯（PE）

2012-06-30

现行

DIN EN 12201-4

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves
供水、排水和污水加压用塑料管道系统.聚乙烯（PE）.第4部分:阀门；德文版EN 12201-4:2012

2012-04-01

现行

BS EN 12106-1998

Plastics piping systems. Polyethylene (PE) pipes. Test method for the resistance to internal pressure after application of squeeze-off
塑料管道系统 聚乙烯（PE）管 施加挤压后抗内压的试验方法

1998-02-15

现行

UNE-EN 12106-1998

PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) PIPES. TEST METHOD FOR THE RESISTANCE TO INTERNAL PRESSURE AFTER APPLICATION OF SQUEEZE-OFF.
塑料管道系统 聚乙烯（PE）管 施加挤压后耐内压的试验方法

1998-05-07

现行

DIN EN 1680

Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
塑料管道系统.聚乙烯（PE）管道系统用阀门.操作机构弯曲时和弯曲后的密封性试验方法；德文版EN 1680:1997

1997-03-01

现行

GB/T 19712-2005

塑料管材和管件 聚乙烯（PE）鞍形旁通抗冲击试验方法
Plastics pipes and fittings Polyethylene(PE) tapping tees Test method for impact resistance

2005-03-23

现行

ISO 13957-1997

Plastics pipes and fittings — Polyethylene (PE) tapping tees — Test method for impact resistance
塑料管道和配件——聚乙烯（PE）开孔三通——抗冲击性试验方法

1997-12-25

现行

BS EN 1716-1997

Plastics piping systems. Polyethylene (PE) tapping tees. Test method for impact resistance of an assembled tapping tee
塑料管道系统 聚乙烯（PE）开孔三通 组装攻丝三通的抗冲击性试验方法

1997-07-15

现行

UNE-EN 1716-1997

PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) TAPPING TEES. TEST METHOD FOR IMPACT RESISTANCE OF AN ASSEMBLED TAPPING TEE.
塑料管道系统 聚乙烯（PE）开孔三通 组装攻丝三通的抗冲击性试验方法

1997-11-14