1.1 这些试验方法描述了用于确定安装在混凝土、混凝土砌体和钢制结构构件中的动力驱动紧固件的静态轴向拉伸和剪切强度的程序。 1.2 这些试验方法适用于垂直于结构构件平面安装的紧固件。 1.3 不包括拉伸和剪切、疲劳、动态和扭转负载阻力的测试。 1.4 以国际单位制表示的数值应视为标准值。国际单位制后括号中给出的值仅供参考，不被视为标准值。 1.5 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 第节给出了具体的危险说明 6. . 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 这些试验方法旨在测量动力驱动紧固件的锚固能力和抗剪性，以提供信息，从中得出适用的设计值，用于结构应用，例如混凝土、混凝土砌体和钢构件。

1.1 These test methods describe procedures for determining the static axial tensile and shear strengths of power-actuated fasteners installed in structural members made of concrete, concrete masonry, and steel. 1.2 These test methods are intended for use with fasteners that are installed perpendicular to a plane surface of the structural member. 1.3 Tests for combined tension and shear, fatigue, dynamic, and torsional load resistance are not covered. 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 6 . 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 These test methods are intended to measure the anchoring capability and shear resistance of power-actuated fasteners to provide information from which applicable design values are to be derived for use in structural applications, such as in members of concrete, concrete masonry, and steel.