1.1 该测试方法用于评估戴手套时手指的灵活性。 1.1.1 该测试方法包括佩戴者用拇指和食指捡起小物体的程序。 1.2 该测试方法适用于评估手套和其他形式的手部保护，使佩戴者能够用拇指和食指捡起小物体。 1.3 该测试方法并未解决手套使用对手部功能的所有影响。应该考虑其他方法来评估手套对握力、触觉和其他感兴趣的手功能的影响。 注1: 此测试方法可能不适用于所有类型或应用的手套。 1.4 以国际单位制或其他单位表示的数值应单独视为标准。每个系统中规定的值必须相互独立使用，不得以任何方式组合值。 1.5 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ====意义和用途====== 5.1 该测试方法旨在通过比较戴手套和不戴手套执行简单任务所需的时间，提供手套对佩戴者手指灵活性影响的定量测量。 5.2 本试验方法不区分手套对佩戴者手部功能的所有影响，也不适用于所有手套类型和应用。建议进行代表手套使用应用的额外评估或测试，以确定手套对佩戴者手部功能的总体影响。 5.2.1 试验方法 1961年 通过测量与转动带手套和不带手套的圆柱形物体相关的扭矩，提供了对手套抓握的影响的评估。 5.2.2 BS EN 420第6.2条通过确定可从平坦光滑表面上拾取并抓握的金属针的直径来评估戴手套的触感。 5.3 该测试的结果可能受到许多因素的影响，包括手套的相对贴合度以及受试者的年龄、性别和一般健康状况。在比较不同受试者的结果时要小心。

1.1 This test method is used for evaluating finger dexterity while wearing gloves. 1.1.1 This test method covers procedures in which the wearer picks up small objects between the thumb and index finger. 1.2 This test method is suitable for evaluating gloves and other forms of hand protection that allow the wearer to pick up small objects between their thumb and index finger. 1.3 This test method does not address all effects of glove use on hand function. Other methods should be considered to evaluate the effects of gloves on grip, tactility, and other hand functions of interest. Note 1: This test method may not apply to all glove types or applications. 1.4 The values stated in SI units or in other units shall be regarded separately as standard. The values stated in each system must be used independently of the other, without combining values in any way. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 The test method is intended to provide a quantitative measurement about the effect of gloves on wearer finger dexterity by comparing the times required to perform a simple task with and without gloves. 5.2 This test method does not discriminate all glove effects on wearer hand function or apply to all glove types and applications. Additional evaluations or tests representative of the glove use application are recommended to determine the overall impact of gloves on wearer hand function. 5.2.1 Test Method F2961 provides an assessment for the impact of gloves’ grip by measuring the torque force associated with turning a cylindrical object both with and without gloves. 5.2.2 Clause 6.2 of BS EN 420 assesses gloved tactility by determining the diameter of a metal pin that can be picked up off a flat, smooth surface and grasped. 5.3 Results from this test can be influenced by many factors, including relative fit of the gloves and the age, gender, and general health conditions of the subjects. Exercise care when comparing the results using different subjects.