现行

GOST 30513-1997

Инструмент абразивный и алмазный. Методы испытаний на безопасность
磨料和金刚石工具 测试方法为安全

1997-11-21

现行

ASTM B1023-22

Standard Test Method for Abrasion Resistance of Hard Anodic Coatings by a Taber-Type Abraser
用泰伯型磨蚀机测定硬质阳极涂层耐磨性的标准试验方法

2022-08-01

现行

HG/T 4303-2012

表面硬化聚酯薄膜 耐磨性测定方法
Test method of resistance to abrasion for hard-coating polyester film

2012-05-24

现行

GOST R 52710-2007

Инструмент абразивный. Акустический метод определения твердости и звуковых индексов по скорости распространения акустических волн
磨具 通过降低声波速度测定硬度和声音指数的声学方法

现行

ASTM B611-21

Standard Test Method for Determining the High Stress Abrasion Resistance of Hard Materials
测定硬质材料高应力耐磨性的标准试验方法

2021-11-01

现行

BS EN ISO 11125-3-2018

Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives-Determination of hardness
涂料和相关产品使用前钢衬底的制备 金属喷砂清理磨料的试验方法

2018-10-04

现行

BS EN ISO 11127-4-2020

Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives-Assessment of hardness by a glass slide test
涂料和相关产品使用前钢衬底的制备 非金属喷砂清理磨料的试验方法

2020-11-04

现行

KS M ISO 11125-3(2017 Confirm)

도료와 관련 제품의 도장 전 강판 기재의 표면 처리-금속 블라스트 세정용 연마제의 시험 방법-제3부:경도 측정
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定

2002-12-31

现行

KS M ISO 11125-3

도료 및 관련 제품의 도장 전 철강 소지 표면처리 — 금속 블라스트 세정 연마재 시험방법 — 제3부: 경도 측정
涂料和相关产品使用前钢衬底的制备.金属喷砂清理磨料的试验方法.第3部分:硬度的测定

2021-04-26

现行

ISO 11125-3-2018

Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 3: Determination of hardness
涂料和相关产品之前制备钢基材 - 金属喷砂清理剂的试验方法 - 第3部分:硬度测定

2018-08-23

现行

GB/T 19816.3-2005

涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness

2005-06-10

现行

BS EN ISO 6789-1-2017

Assembly tools for screws and nuts. Hand torque tools-Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance
螺钉和螺母的装配工具 手动扭矩工具

2017-03-31

现行

DIN EN ISO 6789

Assembly of tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003)
螺钉和螺母用装配工具.手动扭矩工具.设计一致性试验 质量一致性试验和重新校准程序的要求和试验方法（ISO 6789-2003）；德文版EN ISO 6789:2003

2003-10-01

现行

UNE-EN ISO 6789-2004

Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003)
螺钉和螺母用装配工具手动扭矩工具设计一致性试验、质量一致性试验和重新校准程序的要求和试验方法（ISO 6789-2003）

2004-01-30

现行

KS M ISO 11127-4(2017 Confirm)

도료와 관련 제품의 도장 전 철강 소지의 조정－비금속 블라스트 세정 연마재 시험방법－제4부：슬라이드 글라스 시험에 의한 경도 측정
涂料和有关产品使用前钢基体的制备非金属喷砂清理磨料的试验方法第4部分:用玻片试验评定硬度

2012-12-18

现行

KS M ISO 11127-4

도료와 관련 제품의 도장 전 철강 소지의 표면처리 — 비금속 블라스트 세정 연마재 시험방법 — 제4부: 슬라이드 글라스 시험에 의한 경도 측정
涂料和相关产品使用前钢衬底的制备.非金属喷砂清理磨料的试验方法.第4部分:通过玻片试验评估硬度

2021-04-26

现行

ISO 11127-4-2020

Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 4: Assessment of hardness by a glass slide test
涂料和相关产品之前的钢基材料的制备 - 非金属喷砂清理剂的试验方法 - 第4部分:通过玻璃载片试验评估硬度

2020-10-09

现行

ISO 6789-1-2017

Assembly tools for screws and nuts — Hand torque tools — Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance
螺丝和螺母装配工具 - 手动扭矩工具 - 第1部分:设计一致性测试和质量一致性测试的要求和方法:符合声明的最低要求

2017-02-23

现行

UNE-EN ISO 11125-3-1997

PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 3: DETERMINATION OF HARDNESS. (ISO 11125-3:1993).
涂料和相关产品使用前钢衬底的制备 金属喷砂清理磨料的试验方法 第3部分:硬度的测定 （ISO 11125-3-1993）

1997-12-09

现行

UNE-EN ISO 11127-4-1998

PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 4: ASSESSMENT OF HARDNESS BY A GLASS SLIDE TEST. (ISO 11127-4:1993).
涂料和相关产品使用前钢衬底的制备 非金属喷砂清理磨料的试验方法 第4部分:通过玻片试验评估硬度 （ISO 11127-4-1993）

1998-03-11