BS 1471:1955-一般工程用锻铝和铝合金规范.拉制管-国家数字标准馆

现行 BS 1471:1955

到馆阅读

收藏跟踪

购买正版

Specification for wrought aluminium and aluminium alloys for general engineering purposes - drawn tube 一般工程用锻铝和铝合金规范.拉制管

发布日期： 1955-12-30

                本英国标准规定了在各种条件下由三个等级的铝和十种铝合金制成的拉制管的要求。购买本文件时可获得的所有当前修订均包含在购买本文件中。

This British Standard specifies requirements for drawn tube made from three grades of aluminium and from ten aluminium alloys in various conditions.All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

ASD-STAN prEN 6070

Aluminium and aluminium alloy wrought products - Technical specification - General requirements
铝和铝合金锻造产品.技术规范.一般要求

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS. GROUP AL. ALLOY L-3052 (AL 99,5 E)
锻造铝和铝合金铝合金L-3052组（铝99,5 E）

Wrought aluminium and aluminium alloys extruded profiles for general engineering

一般工业用铝及铝合金挤压型材
Wrought aluminium and aluminium alloys extruded profiles for general engineering

BS EN 2101-1991

Specification for chromic acid anodizing of aluminium and wrought aluminium alloys
铝和锻铝合金的铬酸阳极氧化规范

BS EN 2284-1991

Specification for sulfuric acid anodizing of aluminium and wrought aluminium alloys
铝和锻铝合金的硫酸阳极氧化规范

ASD-STAN prEN 6071

Aluminium and aluminium alloy wrought products - Technical specification - Plate
铝和铝合金锻造产品.技术规范.板材

Wrought aluminium and aluminium alloys for general engineering purposes. Bars and sections
一般工程用锻铝和铝合金钢筋和型材

Wrought aluminium and aluminium alloys for general enginerring purposes, sheet and strip
一般工程用锻铝和铝合金薄板和带材

Specification for wrought aluminium and aluminium alloys for general engineering purposes - rivet, bolt and screw stock
一般工程用锻铝和铝合金规范.铆钉、螺栓和螺钉

BS EN 2070-6-1991

Specification for aluminium and aluminium alloy wrought products. Technical specification-Rivet wire
铝及铝合金锻造产品规范技术规格铆钉线

BS EN 2070-4-1991

Specification for aluminium and aluminium alloy wrought products. Technical specification-Tube for structures
铝及铝合金锻造产品规范技术规格结构用钢管

UNE-EN 2070-1/A1-1994

AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 1: GENERAL REQUIREMENTS.
航空航天系列铝及铝合金锻造制品技术规格第1部分:一般要求

ASD-STAN prEN 4400-1

Aluminium and aluminium alloy wrought products - Technical Specification Part 1: Plate
铝及铝合金锻制品.技术规范.第1部分:板材

Aerospace; wrought aluminium alloy wedge; technical specifications
航空航天锻造铝合金楔；技术规格

UNE-EN 2070-7-1993

AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOYS WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 7: WROUGHT FORGING STOCK.
航空航天系列铝及铝合金锻造制品技术规格第7部分:锻造坯料

BS EN 2070-5-1991

Specification for aluminium and aluminium alloy wrought products. Technical specification-Tube used under pressure
铝及铝合金锻造产品规范技术规格压力下使用的管子

UNE-EN 570-2008

Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification
铝和铝合金.从锻造产品获得的冲击挤压段塞.规范

Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification
铝和铝合金.从锻造产品获得的冲击挤压段塞.规范；德文版EN 570:2007

Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specification
铝和铝合金从锻造产品中获得的冲击挤压段塞规格

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统