BS EN 60966-2-7:2016适用于IEC 61196-6和 IEC 61196-7。它涉及无线电和电视接收器的电缆组件，尤其是 电缆组件子系列F（IEC 61169-47）。本详细规范给出了应采用的子系列要求和严格程度。在资格认证的情况下，资格认证将按照 IEC 60966-2-1:2008，考虑到指定的变体。 只有测试结果 可能取决于变体是否会重复。在能力批准下，资格认证将在定义的相关CQC上进行 IEC 60966-2-1:2008的12.3中，并在CM中进行了描述。除非CM中另有规定， 仅对交付的产品进行Ba组和Eb组的逐批测试；所有其他 试验将在IEC 60966-2-1:2008第12.3条中定义的CQC上进行，并在 CM。交叉引用:IEC 60966- 1:1999EN 60966-1:1999IEC 60966-2-1:2008EN 60966-2-1:2009IEC 60966-2-2:2003EN 60966-2-2:2003IEC 61169-47EN 61169-47IEC 61196-6IEC 61196-7IEC 62153-4-7购买本文件时提供的所有当前修改件均包括在内。

BS EN 60966-2-7:2016 applies to flexible coaxial cables described in IEC 61196-6 and IEC 61196-7. It relates to cable assemblies for radio and TV receivers, and in particular to the cable assemblies subfamily F (IEC 61169-47).This detail specification gives subfamily requirements and severities which shall be applied.Under qualification approval, the qualification will be conducted in accordance with 12.2 of IEC 60966-2-1:2008 taking into account the specified variants. Only the tests whose results might depend on the variants will be repeated.Under capability approval, the qualification will be conducted on the relating CQCs as defined in 12.3 of IEC 60966-2-1:2008 and described in the CM. Unless otherwise specified in the CM, only lot-by-lot tests from groups Ba and Eb will be conducted on delivered products; all other tests will be performed on CQCs as defined in 12.3 of IEC 60966-2-1:2008 and described in the CM.Cross References:IEC 60966-1:1999EN 60966-1:1999IEC 60966-2-1:2008EN 60966-2-1:2009IEC 60966-2-2:2003EN 60966-2-2:2003IEC 61169-47EN 61169-47IEC 61196-6IEC 61196-7IEC 62153-4-7EN 62153-4-7All current amendments available at time of purchase are included with the purchase of this document.