L-3 Lightfastness Standard Fabrics
L-3耐光性标准织物

L-2 Lightfastness Standard Fabrics
L-2耐光性标准织物

L-5 Lightfastness Standard Fabrics
L-5耐光性标准织物

L-6 Lightfastness Standard Fabrics
L-6耐光性标准织物

Standard for Exhibition Display Units-Fabrication and Installation (Bulletin, 8/29/2001)
展览展示装置制造和安装标准（公告 8/29/2001）

2001-08-29

纺织品 色牢度试验 标准贴衬织物 第8部分：二醋酯纤维
Textiles―Tests for colour fastness―Standard adjacent fabric―Part 8: Secondary acetate

2014-09-03

SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTIONS TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 8: SOLUTION OF SODIUM THIOSULFATE, OF CONCENTRATION 0,1 MOL/L.
表面活性剂 用于表面活性剂及其制剂容量分析的标准溶液的制备、标准化和储存方法 第8部分:浓度为0.1 MOL/L的硫代硫酸钠溶液

1994-07-08

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, IN309 and ER309(L), As-Welded Condition, Primarily Pipe Applicati
用碳钢（M-1/P-1/S-1 第1或2组）自耗镶块根部与奥氏体不锈钢（M-8/P-8/S-8 第1组）进行钨极气体保护焊的标准焊接工艺规范（SWPS） 1/16至1-1/2英寸厚 IN309和ER309（L） 焊态 主要用于管道应用

STANDARD WELDING PROCEDURE SPECIFICATION(WPS) FOR; GAS TUNGSTEN ARC WELDISTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK, ER309(L), AS-WELDED
标准焊接工艺规范（WPS）；钨极气体保护焊1/16至1-1/2英寸厚ER309（L）焊态奥氏体不锈钢（M-8/P-8/S-8 1组）与碳钢（M-1/P-1/S-1 1或2组）的钨极气体保护焊标准焊接工艺规范（SWPS）

2002-08-28