BS EN 845-3:2013+A1:2016规定了用于结构用途（见5.2.1）和非结构用途（见5.2.2）的砌体垫层接缝钢筋的要求。当产品拟用于空心墙施工时，本欧洲标准仅涵盖网状结构作为垫层接缝钢筋的性能，而不包括其作为穿过空心墙的墙体连接件的性能。本欧洲标准不适用于:单个棒材或棒材形式的产品；由除规定等级的奥氏体不锈钢、奥氏体-铁素体不锈钢、预镀锌钢板或镀锌钢丝以外的材料制成的产品，有或没有有机涂层。 注:附录ZA仅指5.2.1中提到的用于结构用途的焊接钢丝网，因为该系列产品的非结构用途没有已知的规定要求。交叉引用:EN 846-2EN 846-3EN 10020EN 10088EN 10143EN 10244EN 10245-1EN 10245-2EN 10245-3EN 10346EN ISO 15630305/2011/EUEN 846-13EN ISO 7500-1ISO 7500-1EN ISO 9513EN ISO/IEC 17025ISO/IEC 17025ISO 12491包含以下内容:勘误表，2013年9月。修正案，2016年9月。修订并替换BS EN 845-3:2013

BS EN 845-3:2013+A1:2016 specifies the requirements for masonry bed joint reinforcement for structural use (see 5.2.1) and for non-structural use (see 5.2.2).Where products are intended for use in cavity wall construction, this European Standard covers only the performance of the meshwork as reinforcement in bed joints and not its performance as wall ties across the cavity.This European Standard is not applicable to:products in the form of individual bars or rods;products formed from materials other than specified grades of austenitic stainless steel, austenitic ferritic stainless steel, zinc pre-coated steel sheet or zinc coated steel wire with or without organic coating.NOTE Annex ZA refers only to welded wire meshwork intended for structural use referred to in 5.2.1 as there are no known regulated requirements for products of this family for non-structural use.Cross References:EN 846-2EN 846-3EN 10020EN 10088EN 10143EN 10244EN 10245-1EN 10245-2EN 10245-3EN 10346EN ISO 15630305/2011/EUEN 846-13EN ISO 7500-1ISO 7500-1EN ISO 9513ISO 9513EN ISO/IEC 17025ISO/IEC 17025ISO 12491Incorporates the following:Corrigendum, September 2013. Amendment, September 2016. Amends and replaces BS EN 845-3:2013