1.1这些规程包括涂层和未涂层机织物的检查和分级程序，以及由此类织物制成的切割件的检查和挑选程序，所有这些都用于制造安全气囊垫。 1.2为便于参考，各检验规程的范围、实践总结、意义和用途、仪器、取样、程序和报告章节分别列出。 检验实践 部分 织物卷 7. 切割件 8. 1.3这些做法可用于区分可能对安全气囊袋制造或性能产生不利影响的织物缺陷和不会产生不利影响的织物缺陷。 1.4在这些实践的分级系统中，仅考虑重大缺陷。 1.5经买方和供应商同意，可使用本规程中规定以外的程序和仪器，并在报告中确认与本规程的具体偏差。 1.6以国际单位制或英寸-磅单位表示的数值应单独视为标准值。每个系统中规定的值不是精确的等价物；因此，每个系统必须相互独立使用。 1.7 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。

1.1 These practices cover procedures for the inspection and grading of coated and uncoated woven fabrics, and for the inspection and culling of cut parts made of such fabrics, all of which are used in the manufacture of inflatable restraint cushions. 1.2 For ease of reference, the scope, summary of practice, significance and use, apparatus, sampling, procedure, and report sections are listed separately for each inspection practice. Inspection Practice Section Fabric Rolls 7 Cut Pieces 8 1.3 These practices can be used to distinguish those fabric imperfections that may adversely affect inflatable restraint cushion fabrication or performance from those imperfections that will not. 1.4 Only major imperfections are considered in the grading systems of these practices. 1.5 Procedures and apparatus other than those stated in these practices may be used by agreement of the purchaser and supplier with the specific deviations from these practices acknowledged in the report. 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.