本报告总结了在矩形储罐中填充收割式制冰机产生的颗粒冰以及冰在温水中融化的模拟研究。这些模型是为带有多达四个随机放置的矩形冰孔/冰采集器的水箱开发的。将融化的水建模为在每个开口区域均匀地通过冰开口进入水箱顶部，或在水箱的平面区域均匀地通过冰开口进入水箱顶部。研究工作的目标是对填充矩形储罐的颗粒冰量进行建模，并对最多四个具有冰口或均匀进水分布的矩形冰口的储罐底部周长出口水温随时间进行建模。

This report summarizes the research performed to model the filling of rectangular storage tanks with particulate ice as produced by a harvesting type of ice maker and the melting of the ice with warm water. The models were developed for tanks with up to four randomly placed rectangular ice openings/ice harvesters. The melt water was modeled as either entering the top of the tank through the ice opening(s) uniformly per opening area or uniformly over the plan area of the tank.The objectives of the research effort were to model the amount of particulate ice that fills a rectangular storage tank and to model the tank bottom perimeter exit water temperature with time for up to four rectangular ice openings with ice opening or uniform entering water distributions.