1.1本标准中的要求适用于行人接近时自动旋转的电动旋转门、一些小型车辆使用以及行人手动旋转门。其中包括减少用户受伤和被诱捕机会的规定。1.2如果本标准包含与行人使用的旋转门和一些小型车辆交通用旋转门的各种部件的最大和最小尺寸有关的规范，则应包含此类尺寸，以便为行业标准应用条件中的用户提供保护。本标准不试图评估与定制安装有关的任何因素。1.3行业认为，图表中显示的外壳尺寸是标准和实用的，可以满足大多数市场需求，并作为安装人员、服务提供商、业主和建筑师的指南。 如果门符合本标准的所有要求，则与所示外壳尺寸的偏差不构成不合规。1.4本标准中描述的试验在实验室条件下进行。应在中性空气压力条件下进行测量。在实际使用中，结果因安装、维护和环境条件而异。

1.1 Requirements in this standard apply to power operated revolving type doors which rotate automatically when approached by pedestrians, some small vehicular use, and manual revolving type doors for pedestrians. Included are provisions to reduce the chance of user injury and entrapment.1.2 Where this standard contains specifications relating to maximum and minimum dimensions of various components of revolving doors for pedestrian use and some small vehicular traffic, such dimensions are included to provide user protection for what are in the industry, standard application conditions. This standard does not attempt to assess any factors that exist with respect to custom installations.1.3 Enclosure sizes shown in the charts are considered by the industry to be standard and practical to meet the majority of the market needs and are shown as a guide to installers, service providers, owners and architects. Deviation from enclosure sizes shown does not constitute non-compliance if the door complies with all requirements in the standard.1.4 Tests described in this standard are performed under laboratory conditions. Measurements shall be taken under neutral air pressure conditions. In actual usage, results vary because of installation, maintenance and environmental conditions.