Tolerances on the threaded portion of taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts according to DIN 8140 for ISO metric coarse and fine pitch threads; Manufacturing tolerances on the threaded portion
丝锥螺纹部分公差的制造.第6部分:DIN 8140中ISO米制粗牙和细牙螺纹用钢丝螺纹嵌件螺纹孔（EG）用磨制丝锥

2003-07-01

Specification for tapping of holes to receive wire thread inserts (ISO metric threads)
用于安装钢丝螺纹嵌件（ISO公制螺纹）的孔攻丝规范

1991-05-31

Wire thread inserts for ISO metric screw threads - Part 2: Tapped holes for thread inserts, thread tolerances
ISO米制螺纹用钢丝螺纹嵌件.第2部分:螺纹嵌件用螺纹孔.螺纹公差

2005-08-01

Tapped Holes for Wire Thread Inserts, (B.S.P.F. Threads), Unplated, Cadmium plated
钢丝螺纹插入件的螺纹孔（B.S.P.F.螺纹） 未镀 镀镉

1955-04-21

Tapped Holes for Wire Thread Inserts, (Unified Threads), Unplated, Cadmium plated
钢丝螺纹插入件（统一螺纹）的螺纹孔 未电镀 镀镉

1969-04-10

安装钢丝螺套螺纹孔用丝锥通用规范
Technical specification for tap usedfor fthreaded hole of the wire thread insert

2004-09-01

轻合金安装钢丝螺套用内螺纹通孔的机、手用丝锥
Through-hole machine and hand taps of internal screw on light alloy for installing wire thread insert

2004-09-01

普通钢安装钢丝螺套用内螺纹通孔的机、手用丝锥
Through-hole machine and hand taps of internal screw on common stees for installing wire thread insert

2004-09-01

Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads)-Diameters below ¼ in
用于安装钢丝螺纹嵌件（UNC和UNF螺纹）的孔攻丝规范 直径小于3/16英寸

1966-01-31

Tapped Holes for Wire Thread Inserts, (B.A., B.S.F., B.S.W. Threads) – Unplated, Cadmium Plated
钢丝螺纹插入件的螺纹孔（B.A. B.S.F. B.S.W.螺纹）–未镀镉

1955-04-21

Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads)-Diameters ¼ in and over
用于安装钢丝螺纹嵌件（UNC和UNF螺纹）的孔攻丝规范 直径3/16英寸及以上

1961-08-16

普通钢安装钢丝螺套用内螺纹不通孔的机、手用丝锥
Non through-hole machine and hand taps of internal screw on common stees for installing wire thread insert

2004-09-01

轻合金安装钢丝螺套用内螺纹不通孔的机、手用丝锥
Non through-hole machine and hand taps of internal screw on light alloy for installing wire thread insert

2004-09-01

Tapped Hole and Fitted Size Data for Helical Coil Wire Thread Inserts (Metric)
螺旋线圈钢丝螺纹插入件的螺纹孔和配合尺寸数据（公制）

1976-02-11