CISPR 16-1-5:2014规定了用于根据CISPR 16-1-6执行天线校准的5 MHz至18 GHz频率范围内的校准站点的要求。根据CISPR 16-1-4，它还规定了用于验证频率范围为30 MHz至1 000 MHz的符合性测试点的参考测试点的要求。根据IEC指南107，它具有基本EMC标准的地位。CISPR 16-1-1和CISPR 16-1-4中给出了测量仪器规范。CISPR 16-4中给出了关于一般不确定性的更多信息和背景，这也有助于建立天线校准过程和现场验证测量的不确定性估计。第二版取消并取代了2003年出版的第一版及其修正案1(2012)。它构成技术修订版，包括与上一版相比的以下重大技术变更: -增加了CISPR 16-1-6中涵盖的其他研究中心的研究中心验证方法； -为扫频测量指定较小的步长； -最小接地平面尺寸增加； -以及其他各种技术和编辑改进。 关键词:电磁兼容

CISPR 16-1-5:2014 specifies the requirements for calibration sites in the frequency range 5 MHz to 18 GHz used to perform antenna calibrations according to CISPR 16-1-6. It also specifies the requirements for reference test sites that are used for the validation of compliance test sites in the frequency range 30 MHz to 1 000 MHz according to CISPR 16-1-4. It has the status of a basic EMC standard in accordance with IEC Guide 107. Measurement instrumentation specifications are given in CISPR 16-1-1 and CISPR 16-1-4. Further information and background on uncertainties in general is given in CISPR 16-4, which can also be helpful in establishing uncertainty estimates for the calibration processes of antennas and site validation measurements. This second edition cancels and replaces the first edition published in 2003, and its Amendment 1 (2012). It constitutes a technical revision which includes the following significant technical changes with respect to the previous edition:
- site validation methods for other sites covered in CISPR 16-1-6 are added;
- smaller step sizes are specified for swept frequency measurements;
- the minimum ground plane size is increased;
- and other miscellaneous technical and editorial refinements are included. Keywords: electromagnetic compatibility