以下列表包括截至2023年12月提供的软管数据，用于方便确定拟根据46 CFR 56.60-25使用的非金属柔性软管组件的可接受性。如果未规定最大允许工作压力（MAWP）或接头类型，请使用制造商推荐的MAWP或接头类型。本列表由SAE工作人员根据本文件中列出产品的制造商提供的信息编制而成。希望在本文件中列出其产品的制造商应:成功地按照SAE J1942表1的要求测试其软管。针对每种测试的特定类型的软管，向SAE J1942中的测试要求提交一份认证信（见样品表表1）以及测试结果。 所有尺寸都应包含在同一个字母中，该字母还必须包含制定SAE J1942-1列表所需的所有信息。SAE将审查该信函，并可自行决定要求查看进一步的测试结果。经批准后，申请人将收到一份标有“接受上市”字样的提交函副本。年度SAE手册中软管清单的截止日期为前一年的9月30日。但是，一旦SAE发布“接受上市”信函，就可以在船舶上使用列出的软管。

The following list consists of hose data provided as of December 2023 and is for convenience in determining acceptability of nonmetallic flexible hose assemblies intended for usage under 46 CFR 56.60-25. Where the maximum allowable working pressure (MAWP) or type of fitting is not specified, use the manufacturer's recommended MAWP or type of fitting. This list has been compiled by SAE staff from information provided by the manufacturers whose product listings appear in this document.Manufacturers wishing to list their products in this document shall:Successfully test their hose to the requirements of SAE J1942, Table 1.Submit a letter of certification to the SAE J1942 test requirements for each specific type of hose tested (see sample table, Table 1) along with the test results. All sizes should be included in the same letter which must also include all of the information necessary to make a SAE J1942-1 listing.SAE will review the letter and may, at their discretion, request to see further test results. A copy of the submittal letter marked “Accepted for Listing” will be returned to the applicant upon approval.The cutoff date for inclusion of a hose listing in the annual SAE Handbook is September 30 of the preceding year. However, listed hoses may be used on vessels as soon as the “Accepted for Listing” letter is issued by SAE.