首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM F2462-05(2021)
到馆提醒
收藏跟踪
购买正版
Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems 光纤系统下水道运行维护的标准做法
发布日期: 2021-05-01
1.1 本规程适用于下水道的操作和维护,随后按照规程安装光缆 F2303页 . 1.2 本规程适用于重力流雨水管、卫生下水道和组合下水道。 1.3 本规程不适用于强制干管、虹吸管或其他加压下水道。 1.4 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 5.1 本文件旨在概述需要光缆所有者和污水管道运营商共同讨论和协商的运维问题。目的是制定足够的书面程序和实践,使光纤系统作为下水道内的二次使用共存。如果下水道主要用于输送流量,则光缆所有者有责任适应下水道运维实践,并制定不会对下水道主要功能产生重大影响的光纤系统运维程序。 5.2 由于整合下水道和光纤系统的做法是一项新兴活动,因此该做法将有助于为其快速安全部署制定指导方针,确保安装的设施长期按预期运行- 期限基础。
1.1 This practice applies to the operation and maintenance of sewers with a subsequent installation of optical fiber cable in accordance with Practice F2303 . 1.2 This practice applies to gravity flow storm sewers, sanitary sewers, and combined sewers. 1.3 This practice does not apply to force mains, siphons, or other pressurized sewers. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 This is intended to outline O&M issues that require discussion and mutual agreement by both the optical fiber cable owner and sewer pipeline operator. The purpose is developing sufficient written procedures and practices to allow optical fiber systems to coexist as a secondary use within a sewer. To the extent that sewers are primarily for conveying flow, it is the responsibility of the optical fiber cable owner to accommodate sewer O&M practices and develop optical fiber system O&M procedures that will not material impact the sewer’s primary function. 5.2 Since the practice of integrating sewers and optical fiber systems is an emerging activity, this practice will help establish guidelines for its rapid and safe deployment, ensuring that the installed facilities are operable as intended on a long-term basis.
分类信息
关联关系
研制信息
归口单位: F36.10
相似标准/计划/法规
现行
AASHTO R 96-19
Standard Practice for Installation, Operation, and Maintenance of Ignition Furnaces
点火炉的安装、操作和维护的标准实施规程
现行
AASHTO R 96-19(2023)
Standard Practice for Installation, Operation, and Maintenance of Ignition Furnaces
点火炉的安装、操作和维护的标准实施规程
现行
ASTM F2303-03(2021)
Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits
选择适用于安装光纤电缆和导管的重力下水道的标准做法
2021-05-01
现行
ASTM F3220-17(2023)
Standard Practice for Prioritizing Sewer Pipe Cleaning Operations by Using Transmissive Acoustic Inspection
用透射声学检验确定下水道管道清洁操作优先级的标准实施规程
2023-09-01
现行
ASTM F2374-24
Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
充气娱乐装置的设计、制造、操作和维护的标准实施规程
2024-05-15
现行
ASTM F2461-23
Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment
水上游乐设备的制造、构造、操作和维护的标准实施规程
2023-06-15
现行
ASTM F770-24
Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
游乐设施和设备的所有权、操作、维护和检验的标准实施规程
2024-05-01
现行
ASTM E3010-15(2019)e1
Standard Practice for Installation, Commissioning, Operation, and Maintenance Process (ICOMP) of Photovoltaic Arrays
光伏阵列的安装、调试、操作和维护过程(ICOMP)的标准实施规程
2019-04-01
现行
ASTM F3133-24
Standard Practice for Classification, Design, Manufacture, Construction, Maintenance, and Operation of Stationary Wave Systems
驻波系统的分类、设计、制造、施工、维护和操作的标准实施规程
2024-05-15
现行
ASTM F2783-20
Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada
加拿大游乐设施和装置的设计、制造、操作、维护和检验的标准实施规程
2020-04-01
现行
ASTM F3615-23
Standard Practice for Additive Manufacturing — Powder Bed Fusion — Condition-Defined Maintenance for Optical Systems
增材制造——粉末床聚变——光学系统条件限定维护的标准实施规程
2023-07-01
现行
ASTM F2970-22
Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
蹦床场地的设计、制造、安装、操作、维护、检查和主要改造的标准实施规程
2022-06-01
现行
MIL MIL-STD-1678-1D Change 1
DEPARTMENT OF DEFENSE STANDARD PRACTICE FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS) (PART 1 OF 5 PARTS) (SUPERSEDING MIL-STD-1678-1C)
国防部标准实施规程光纤布线系统要求和测量(第1部分:设计、安装和维护要求)(共5部分中的第1部分)(取代MIL-STD-1678-1C)
2017-01-17
现行
MIL MIL-STD-1678-1D
DEPARTMENT OF DEFENSE STANDARD PRACTICE FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS) (PART 1 OF 5 PARTS) (SUPERSEDING MIL-STD-1678-1C)
国防部标准规程光纤布线系统要求和测量(第1部分:设计、安装和维护要求)(第1部分 共5部分)(取代MIL-STD-1678-1C)
2016-10-03
现行
MIL MIL-STD-1678-1D w/Change 2
DEPARTMENT OF DEFENSE STANDARD PRACTICE FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS) (PART 1 OF 5 PARTS) (SUPERSEDING MIL-STD-1678-1C)
国防部标准实施规程光纤布线系统要求和测量(第1部分:设计、安装和维护要求)(共5部分中的第1部分)(取代MIL-STD-1678-1C)
2019-11-13