BS EN 13108-1:2016规定了使用的混合组沥青混凝土混合物的要求 在道路、机场和其他交通地区。沥青混凝土用于面层、粘合剂 课程、规范课程和基础。混合组沥青混凝土的混合物是在热沥青的基础上生产的。混合物 基于现场回收利用的沥青乳液和沥青材料不包括在本条款中 标准本欧洲标准包括选择成分材料的要求。它是 设计为结合EN 13108-20和EN 13108阅读- 交叉引用:EN 1097-6EN 1426EN 1427EN 12591EN 12697-3EN 12697-8EN 12697-12EN 12697-13EN 12697-16EN 12697-22EN 12697-24EN 12697-25EN 12697-26EN 12697-31EN 12697-34EN 12697-41EN 12697-43EN 12697-44EN 12697-45EN 12697-46EN 12697-49EN 13043EN 13108-4:2016EN 13108-8EN 13108-20:2016EN 13108-21EN 13501-1:2007+A1:2009EN 13924-13924 1EN 14023EN ISO 11925-2011/EUAll当前版本购买本文件时提供的修订内容包括在内。

BS EN 13108-1:2016 specifies requirements for mixtures of the mix group Asphalt Concrete for use on roads, airfields and other trafficked areas. Asphalt Concrete is used for surface courses, binder courses, regulating courses, and bases.The mixtures of the mix group Asphalt Concrete are produced on the basis of hot bitumen. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard.This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21.Cross References:EN 1097-6EN 1426EN 1427EN 12591EN 12697-3EN 12697-8EN 12697-12EN 12697-13EN 12697-16EN 12697-22EN 12697-24EN 12697-25EN 12697-26EN 12697-31EN 12697-34EN 12697-41EN 12697-43EN 12697-44EN 12697-45EN 12697-46EN 12697-49EN 13043EN 13108-4:2016EN 13108-8EN 13108-20:2016EN 13108-21EN 13501-1:2007+A1:2009EN 13924-1EN 13924-2EN 14023EN ISO 11925-2ISO 11925-2305/2011/EUAll current amendments available at time of purchase are included with the purchase of this document.