BS EN 61757-2-2:2017定义了分布式温度测量的详细规范 通过光纤传感器，也称为光纤分布式温度传感（DTS）。DTS 包括拉曼散射、布里渊散射和瑞利散射效应的使用。在里面 此外，基于拉曼散射和瑞利散射的测量是用 仅限单端光纤配置。基于布里渊散射的测量 使用单端光纤或光纤环路配置执行。这项技术可以从 双方同时进行（例如布里渊光时域分析，BOTDA）是指 这里是一个循环配置。光纤传感器的通用规范定义见 IEC 61757-1:2012。IEC 61757的本部分规定了最重要的DTS性能参数，并定义了 他们决定的程序。除了一组性能参数外 定义了其他参数列表，以支持测量的定义 规范及其相关测试程序。这些额外的定义 提供的参数仅供参考，应包含在 性能参数。定义了一个通用测试设置，其中所有参数都可以通过一组测试来收集。 各测量参数的具体测试见本条款。这 第4条描述和描述了一般测试设置，以及一般测试设置列表 应根据特定DTS仪器和测试记录的信息 用于根据IEC 61757-2-2测量这些参数的设置。交叉引用:IEC 60050VIMEN 61757-1（IEC 61757-1:2012）ASIEC 61757-1:2012ISO/IEC指南99:2007IEC/TR 61931:1998SEAFOM-MSP-01:2010购买本文件时可提供的所有当前修改件均包含在购买本文件中。

BS EN 61757-2-2:2017 defines detail specifications for distributed temperature measurement by a fibre optic sensor, also known as fibre optic distributed temperature sensing (DTS). DTS includes the use of Raman scattering, Brillouin scattering and Rayleigh scattering effects. In addition, Raman scattering and Rayleigh scattering based measurements are performed with a single-ended fibre configuration only. Brillouin scattering based measurements are performed with a single-ended fibre or fibre loop configuration. The technique accessible from both sides at same time (e. g. Brillouin optical time domain analysis, BOTDA) is referred to here as a loop configuration. Generic specifications for fibre optic sensors are defined in IEC 61757-1:2012.This part of IEC 61757 specifies the most important DTS performance parameters and defines the procedures for their determination. In addition to the group of performance parameters, a list of additional parameters has been defined to support the definition of the measurement specifications and their associated test procedures. The definitions of these additional parameters are provided for informational purposes and should be included with the sets of performance parameters.A general test setup is defined in which all parameters can be gathered through a set of tests. The specific tests are described within the clause for each measurement parameter. This general test setup is depicted and described in Clause 4 along with a list of general information that should be documented based upon the specific DTS instrument and test setup used to measure these parameters as per IEC 61757-2-2.Cross References:IEC 60050VIMEN 61757-1 (IEC 61757-1:2012) ASIEC 61757-1:2012ISO/IEC Guide 99:2007IEC/TR 61931:1998SEAFOM-MSP-01:2010All current amendments available at time of purchase are included with the purchase of this document.