BS EN IEC 60917-1:2019-用于电气和电子设备实践的机械结构开发的模块化订单-国家数字标准馆

现行 BS EN IEC 60917-1:2019

到馆提醒

收藏跟踪

购买正版

Modular order for the development of mechanical structures for electrical and electronic equipment practices-Generic standard 用于电气和电子设备实践的机械结构开发的模块化订单

发布日期： 2019-11-18

IEC 60917的本部分规定了设备实践和模块化设计之间的关系
适用于电子和电气设备主要结构尺寸的订单
安装在各种装置中的设备，必须考虑尺寸接口
用于机械兼容性。
本文件还规定了机械结构零件和组件的术语
电气和电子设备，以澄清设备实践之间的具体关系
和模块化顺序。交叉引用:EN 60297-3-100IEC 60297-3-102IEC 61969-2IEC 60917-2-3IEC 60050-581IEC 60917-2-4ISO 3676IEC 60297-3-100IEC 60917-2EN 60297-3-109IEC 60297-3-106ISO 2848IEC 60297-3-107ISO 1791IEC 60297-3-110IEC 60297-3-108IEC 60917-2-2EN 60297-3-104IEC 61969-1IEC 60297-3-
103IEC 62194EN ISO 80000-3:2013EN ISO 80000-1:2013ISO 80000-3:2006ISO 80000-1:2009IEC指南103:1980IEC 60917-2-1EN 60917-2-1EN 60297-3-105IEC 62610（所有部分）EN 60297-3-107IEC 60297-3-101IEC 60917-2-5EN 60297-3-106IEC 60297-3-104EN 60297-3-IEC 10360297（所有部分）IEC TS 62454IEC 60297-3-1096TR-1006EN 60297-3-108659/IEC 6063所有部分60297-3-104、EN 60917-2IEC 61554EN IEC 60297-3-110ISO 3394EN 60297-3-102ISO 1040EN 60297-3-101购买本文件时可获得的所有现行修订均包含在购买本文件中。

This part of IEC 60917 specifies the relationships between equipment practices and the modular
order which are applicable to the main structural dimensions of electronic and electrical
equipment mounted in various installations where dimensional interfaces have to be considered
for mechanical compatibility.
This document also established terms for parts and assemblies of mechanical structures for
electrical and electronic equipment, to clarify the specific relations between equipment practices
and modular order.Cross References:EN 60297-3-100IEC 60297-3-102IEC 61969-2IEC 60917-2-3IEC 60050-581IEC 60917-2-4ISO 3676IEC 60297-3-100IEC 60917-2EN 60297-3-109IEC 60297-3-106ISO 2848IEC 60297-3-107ISO 1791IEC 60297-3-110IEC 60297-3-108IEC 60917-2-2EN 60297-3-104IEC 61969-1IEC 60297-3-103IEC 62194EN ISO 80000-3:2013EN ISO 80000-1:2013ISO 80000-3:2006ISO 80000-1:2009IEC GUIDE 103:1980IEC 60917-2-1EN 60917-2-1EN 60297-3-105IEC 62610 (all parts)EN 60297-3-107IEC 60297-3-101IEC 60917-2-5EN 60297-3-106IEC 60297-3-104EN 60297-3-103IEC 60297 (all parts)IEC TS 62454IEC 60297-3-109ISO 1006EN 60297-3-108IEC 61969-3ISO 6514IEC/TR 60668IEC 60297-3-105IEC 61587 (all parts)IEC TR 60668IEC 60297-3-104,EN 60917-2IEC 61554EN IEC 60297-3-110ISO 3394EN 60297-3-102ISO 1040EN 60297-3-101All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

GOST R IEC 60917-1-2011

Модульный принцип построения базовых несущих конструкций для электронного оборудования. Часть 1. Общий стандарт
用于电子设备实践的机械结构开发的模块化顺序一般标准

GB/T 19290.1-2003

发展中的电子设备构体机械结构模数序列第1部分:总规范
Modular order for the development of mechanical structures for electronic equipment practices--Part 1: Generic standard

UNE-EN 60917-1-2001

Modular order for the development of mechanical structures for electronic equipment practices -- Part 1: Generic standard.
电子设备用机械结构开发的模块化顺序第1部分:通用标准

IEC 60917-1-2019

Modular order for the development of mechanical structures for electrical and electronic equipment practices - Part 1: Generic standard
电气和电子设备用机械结构开发的模块化顺序.第1部分:通用标准

IEC 60917-1-2019 RLV

Modular order for the development of mechanical structures for electrical and electronic equipment practices - Part 1: Generic standard
电气和电子设备用机械结构开发的模块化顺序.第1部分:通用标准

GB/T 31847-2015

电工电子设备机械结构模数序列及其应用
Mechanical structures for electrotechnical and electronic equipment—Modular order and associated applications

BS EN 60917-2-1994

Modular order for the development of mechanical structures for electronic equipment practices.-Sectional specification. Interface co-ordination dimensions for the 25 mm equipment practice
为电子设备实践开发机械结构的模块化命令分规范 25mm设备规程的接口协调尺寸

BS 10/30239062 DC

BS EN 60917-2-5. Mechanical structures for electronic equipment-Modular order for the development of mechanical structures for electronic equipment practices. Part 2-5. Cabinet interface dimensions for miscellaneous equipment
英国标准EN 60917-2-5 电子设备机械结构模块化指令用于开发电子设备实践的机械结构第2-5部分其他设备的机柜接口尺寸

GB/T 19290.2-2003

发展中的电子设备构体机械结构模数序列第2部分: 分规范 25 mm设备构体的接口协调尺寸
Modular order for the development of mechanical structures for electronic equipment practices--Part 2: Sectional specification--Interface co-ordination dimensions for the 25mm equipment practice

GOST R IEC 60917-2-2011

Модульный принцип построения базовых несущих конструкций для электронного оборудования. Часть 2. Секционный стандарт. Координационные размеры интерфейса для несущих конструкций с шагом 25 мм
用于电子设备实践的机械结构开发的模块化顺序第二部分 25 mm设备实践的界面协调尺寸

IEC 60917-2-1992

Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice
用于电子设备实践的机械结构开发的模块化顺序 - 第2部分:部分规范 - 25 mm设备实践的接口协调尺寸

BS EN 60917-2-1-1997

Modular order for the development of mechanical structures for electronic equipment practices. Sectional specification. Interface co-ordination dimensions for the 25 mm equipment practice-Detail specification. Dimensions for cabinets and racks
为电子设备实践开发机械结构的模块化命令分规范 25 mm设备实践的接口协调尺寸详细说明机柜和机架的尺寸

BS EN 60917-2-5-2012

Modular order for the development of mechanical structures for electronic equipment practices-Sectional specification. Interface co-ordination dimensions for the 25 mm equipment practice. Cabinet interface dimensions for miscellaneous equipment
电子设备实践中机械结构开发的模块化指令

IEC 60917-2-5-2012

Modular order for the development of mechanical structures for electronic equipment practices - Part 2-5: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Cabinet interface dimensions for miscellaneous equipment
用于电子设备实践的机械结构开发的模块化命令 - 第2-5部分:部分规范 - 25 Mm设备实践的接口协调尺寸 - 其他设备的机柜接口尺寸

GB/T 19290.3-2008

发展中的电子设备构体机械结构模数序列第2-1部分：分规范 25mm设备构体的接口协调尺寸详细规范机柜和机架的尺寸
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-1: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Detail specification - Dimensions for cabinets and racks

GB/T 19290.7-2021

发展中的电子设备构体机械结构模数序列　第2-5部分：分规范　25 mm设备构体的接口协调尺寸　各种设备用机柜接口尺寸
Modular order for the development of mechanical structures for electronic equipment practices—Part 2-5: Sectional specification—Interface co-ordination dimensions for the 25 mm equipment practice—Cabinet interface dimensions for miscellaneous equipment

GOST R IEC 60917-2-1-2011

Модульный принцип построения базовых несущих конструкций для электронного оборудования. Часть 2. Секционный стандарт. Координационные размеры интерфейса для несущих конструкций с шагом 25 мм. Раздел 1. Детальный стандарт. Размеры шкафов и стоек
用于电子设备实践的机械结构开发的模块化顺序第二部分 25 mm设备实践的界面协调尺寸细节规格机柜和机架尺寸

IEC 60917-2-1-1993

Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 1: Detail specification - Dimensions for cabinets and racks
用于电子设备实践的机械结构开发的模块化命令 - 第2部分:部分规范 - 25 Mm设备实践的接口协调尺寸 - 第1节:详细规格 - 机柜和机架尺寸

BS EN 60917-2-2-1997

Modular order for the development of mechanical structures for electronic equipment practices. Sectional specification. Interface co-ordination dimensions for the 25 mm equipment practice-Detail specification. Dimensions for subracks, chassis, backplanes, front panels and plug-in units
为电子设备实践开发机械结构的模块化命令分规范 25 mm设备实践的接口协调尺寸详细说明机架、机箱、背板、前面板和插件的尺寸

Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification; interface coordination dimensions for the 25 mm equipment practice (IEC 60917-2:1992); German version EN 60917-2:1994
电子设备用机械结构开发的模块化顺序.第2部分:分规范；25mm设备的接口协调尺寸规程（IEC 60917-2-1992）；德文版EN 60917-2:1994

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统