SAE AMS5659/H1150-耐腐蚀钢、棒材、线材、锻件、环和挤压件15Cr-4.5Ni-0.30Cb（Nb）-3.5Cu溶液和沉淀热处理（H1150）-国家数字标准馆

现行 SAE AMS5659/H1150

到馆提醒

收藏跟踪

购买正版

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu Solution and Precipitation Heat Treated (H1150) 耐腐蚀钢、棒材、线材、锻件、环和挤压件15Cr-4.5Ni-0.30Cb（Nb）-3.5Cu溶液和沉淀热处理（H1150）

发布日期： 2022-09-14

本规范涵盖公称直径、厚度或六边形的12英寸（305 mm）及以下的耐腐蚀钢产品，平行边之间的距离最小，在溶液和沉淀热处理（H1150）条件下，最大横截面积为144平方英寸（930 cm2）。

This specification covers a corrosion-resistant steel product 12 inches (305 mm) and under in nominal diameter, thickness or for hexagons, least distance between parallel sides, and having a maximum cross-sectional area of 144 square inches (930 cm2) in the solution and precipitation heat treated (H1150) condition.

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, Rings and Forging Stock 9.0Mn - 20Cr - 6.5Ni - 0.27N Solution Heat Treated
经9.0Mn-20Cr-6.5Ni-0.27N固溶热处理的耐腐蚀钢、棒材、线材、锻件、挤压件、环和锻件

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, Mechanical Tubing, Rings, and Stock for Forgings, Extrusions, and Rings, Wear and Galling Resistant, 8.0Mn - 4.0Si - 17Cr - 8.5Ni - 0.13N Solution Heat Treated
8.0Mn-4.0Si-17Cr-8.5Ni-0.13N固溶热处理的耐腐蚀棒材、线材、锻件、挤压件、机械卡套管、环件和锻件用坯料、挤压件和环件

SAE AMS5659/H1100

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu Solution and Precipitation Heat Treated (H1100)
耐腐蚀钢、棒材、线材、锻件、环和挤压件15Cr-4.5Ni-0.30Cb（Nb）-3.5Cu溶液和沉淀热处理（H1100）

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, and Rings 5.0Mn - 22Cr - 12.5Ni - 2.2Mo - 0.20Cb - 0.30N - 0.20V Solution Heat Treated
经5.0Mn-22Cr-12.5Ni-2.2Mo-0.20Cb-0.30N-0.20V固溶热处理的耐腐蚀钢、棒材、线材、锻件、挤压件和环件

SAE AMS5659/H1075

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu Solution and Precipitation Heat Treated (H1075)
耐腐蚀钢、棒材、线材、锻件、环和挤压件15Cr-4.5Ni-0.30Cb（Nb）-3.5Cu固溶和沉淀热处理（H1075）

Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Forging and Ring Stock, Mechanical Tubing, and Rings 12.5Cr (SAE 51410) Annealed
退火的耐腐蚀耐热钢、棒材、线材、锻件、锻件和环形坯料、机械管和环12.5Cr（SAE 51410）

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging and Ring Stock 19Cr - 10Ni Solution Heat Treated
耐腐蚀钢、棒材、线材、锻件、机械卡套管和环19Cr-10Ni固溶热处理

Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Extrusions, Rings, and Stock for Forgings, Extrusions, and Rings 62Ni - 21.5Cr - 9.0Mo - 3.65Cb (Nb) Annealed
62Ni-21.5Cr-9.0Mo-3.65Cb（Nb）退火的耐腐蚀和耐热镍合金棒材、锻件、挤压件、环和锻件、挤压件和环的坯料

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, Tubing, and Rings Wear and Galling Resistant 8.0Mn - 4.0Si - 17Cr - 8.5Ni - 0.13N Solution Heat Treated
经固溶热处理的耐腐蚀钢、棒材、线材、锻件、挤压件、管材和环件耐磨损损8.0Mn-4.0Si-17Cr-8.5Ni-0.13N

Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 17Cr (430) Annealed
经17Cr（430）退火的耐腐蚀耐热钢、棒材、线材、锻件、机械管和环

Steel, Wear, Galling, and Corrosion-Resistant Bars, Wire, Forgings, Extrusions, Mechanical Tubing, Rings, and Stock for Forgings, Rings, and Extruding 5.0Mn - 3.5Si - 16.5Cr - 5.0Ni - 0.14N Solution Heat Treated
经固溶热处理的耐磨、高凸和耐腐蚀棒材、线材、锻件、挤压件、机械卡套管、环件和锻件、环件及挤压件用坯料5.0Mn-3.5Si-165Cr-5.0Ni-0.14N

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Forging Stock 19Cr - 9.5Ni Solution Heat Treated
经19Cr-9.5Ni固溶热处理的耐腐蚀钢、棒材、线材、锻件、机械管、环和锻坯

Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 13Cr - 2.0Ni - 3.0W Annealed
13Cr-2.0Ni-3.0W退火耐腐蚀耐热钢、棒材、线材、锻件、机械管和环

Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings, 12Cr Ferrite Controlled, Annealed
耐腐蚀和耐热钢、棒材、线材、锻件、机械管和环、12Cr铁素体控制、退火

SAE AMS5659/H1025C

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu Consumable Remelted, Solution and Precipitation Heat Treated (H1025)
耐腐蚀钢、棒材、线材、锻件、环和挤压件15Cr-4.5Ni-0.30Cb（Nb）-3.5Cu自耗重熔、固溶和沉淀热处理（H1025）

Steel Bars, Wire, Forgings and Forging Stock, Mechanical Tubing, Rings, and Extrusions, Corrosion-Resistant 11.8Cr - 2.5Ni - 1.8Mo - 0.33V (0.08 - 0.15C) Annealed, Vacuum Arc or Electroslag Remelted
经耐腐蚀11.8Cr-2.5Ni-1.8Mo-0.33V（0.08-0.15C）退火、真空电弧或电渣重熔的钢筋、线材、锻件和锻坯、机械管、环件和挤压件

Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Forging and Ring Stock, Mechanical Tubing, and Rings 12Cr Ferrite Controlled, Annealed, Consumable Electrode Melted
耐腐蚀和耐热钢、棒材、线材、锻件、锻件和环形坯料、机械管和环形件12Cr铁素体控制、退火、自耗电极熔化

Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated
17Cr-12Ni-2.5Mo（316）固溶热处理的耐腐蚀和耐热钢、棒材、线材、锻件、机械管、环和锻件和环坯料

KS W 1136(2018 Confirm)

항공기용 내식강－봉강, 선재 및 단조품
航空航天－钢耐腐蚀（18－8）棒材、线材和锻坯

KS W 1136(2023 Confirm)

항공기용 내식강－봉강, 선재 및 단조품
航空航天.耐腐蚀钢（18－8）棒材、线材和锻件

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统