序言这是CSA C866的第二版，LED灯具的性能。它取代了2012年出版的前一版。本标准涵盖了室内、室外、住宅和商用发光二极管（LED）灯具的能效和其他性能要求，以及相关试验程序。考虑了备用电源和控制装置的性能要求，但一致认为这些要求将在本标准的未来版本中解决。上一版是为支持LED灯具的市场引入而开发的，主要面向住宅产品，而新版则提供了一套更为简化的要求和测试方法，侧重于室内和室外的商业和住宅应用。 CSA集团承认，该标准的制定在一定程度上是由BC Hydro、加拿大电力协会、效率新斯科舍省、魁北克Hydro、独立电力系统运营商、马尼托巴Hydro、加拿大自然资源部、新斯科舍省能源部、安大略省能源部和SaskPower的财政支持实现的。范围1。1本标准规定了用于一般照明的定向和非定向LED灯具的能效和性能要求，包括商业和住宅、室内和室外以及具有重要装饰功能的LED灯具。注:1）白色可调灯具和连接灯具包含在本标准范围内。2） 灯具、便携式灯具、自动照明设备的安全要求- CSA C22中提供了镇流灯和灯适配器。2号250.0，CSA C22。2号250.4和CSA C22。分别为1993年第2号。1.2本标准不包括以下LED产品:a）适用于CAN/CSA-C653和CAN/CSA-C811规定的道路照明和街道照明灯具；b） 直流（DC）供电灯具，例如PoE灯具；c） 用于指示，例如交通灯、出口标志和人行横道标志；d） 专门用于装饰或变色亮点，例如节日灯、洗墙灯和变色灯具；e） 用于改造现有灯具（LED改造）；f） 其他固态照明（SSL），如有机发光二极管（OLED）和纳米技术；g） 与设备或仪表集成，并由其制造商安装； h） 专门设计用于医疗或牙科手术；i） 专门用于展示柜，其中照明是展示柜的一部分；j） 与食品加热和食品制备设备集成；k） 专门用于植物生长或维护；l） 广告或定向标志的组成部分；m） 专门用于戏剧目的，包括舞台表演、电影和视频制作；或n）专门用于电视广播。1.3在本标准中，“应”用于表示要求，即用户为遵守本标准而有义务满足的规定；“应该”用于表示建议或建议但不需要的建议；“可”用于表示一个选项或在标准范围内允许的选项。 注释随附条款不包括要求或替代要求；随附条款的注释的目的是将解释性或信息性材料与文本分开。表和图的注释被视为表或图的一部分，可以作为要求编写。附件被指定为规范性（强制性）或信息性（非强制性）以定义其应用。

PrefaceThis is the second edition of CSA C866, Performance of LED luminaires. It supersedes the previous edition published in 2012. This Standard covers the energy efficiency and other performance requirements, as well as the associated test procedures for indoor, outdoor, residential, and commercial light-emitting diodes (LED) luminaires. Performance requirements on standby power and controls were considered, but it was agreed that these would be addressed in future editions of this Standard. While the previous edition, developed to support the market introduction of LED luminaires, was oriented mostly to residential products, this new edition presents a more simplified set of requirements and testing methodologies that focuses on both commercial and residential applications, both indoor and outdoor. CSA Group acknowledges that the development of this Standard was made possible, in part, by the financial support of BC Hydro, Canadian Electricity Association, Efficiency Nova Scotia, Hydro-Quebec, Independent Electricity System Operators, Manitoba Hydro, Natural Resources Canada, Nova Scotia Department of Energy, the Ontario Ministry of Energy, and SaskPower.Scope1.1 This Standard specifies energy efficiency and performance requirements for LED luminaires of the directional and non-directional type used for general illumination, including commercial and residential, indoor and outdoor, as well as those with a significant decorative function. Notes: 1) White tunable luminaires and connected luminaires are included in the scope of this Standard. 2) Safety requirements for luminaires, portable luminaires, self-ballasted lamps, and lamp adapters are provided in CSA C22.2 No. 250.0, CSA C22.2 No. 250.4, and CSA C22.2 No. 1993, respectively. 1.2 This Standard does not cover LED products that are a) intended for roadway lighting and street lighting luminaires covered under CAN/CSA-C653 and CAN/CSA-C811; b) direct current (DC) powered luminaires, e.g. PoE luminaires; c) intended for indication, e.g., traffic lights and exit signs and pedestrian crosswalk signs; d) exclusively intended for decoration or colour changing highlights, e.g., holiday lights, wall washing, and colour changing luminaires; e) intended for retrofitting into existing fixtures (LED retrofit); f) other solid state lighting (SSL) such as organic light-emitting diodes (OLEDs) and nanotechnology; g) integral to equipment or instrumentation and are installed by its manufacturer; h) specifically designed for use only during medical or dental procedures; i) specifically used in display cases, where the lighting is integral to the display case; j) integral to food warming and food preparation equipment; k) specifically used for plant growth or maintenance; l) an integral part of advertising or directional signage; m) specifically used for theatrical purposes, including performance stage, and film and video production; or n) specifically intended for television broadcasting. 1.3 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.